[gcode_macro END_PRINT]
gcode:
    TURN_OFF_HEATERS

    # move head away from print
    G91                 ; relative coordinates
    G1 X-2 Y-2 E-3 F300 ; Move nozzle away from print while retracting   
    G1 Z10 F3000        ; Raise nozzle by 10mm
    G90                 ; absolute coordinates

    # present print
    G1 Y220 ; forward bed
    G28 X0  ; home X axis

    M84     ; disable motors
    M300    ; beep


[gcode_macro LIGHT_ON]
gcode:
    SET_PIN PIN=light VALUE=1

[gcode_macro LIGHT_OFF]
gcode:
    SET_PIN PIN=light VALUE=0

[gcode_macro M300]
gcode:
    # Use a default 1kHz tone if S is omitted.
    {% set S = params.S|default(1000)|int %}
    # Use a 10ms duration is P is omitted.
    {% set P = params.P|default(10)|int %}
    SET_PIN PIN=buzzer VALUE=1
    G4 P{P}
    SET_PIN PIN=buzzer VALUE=0