diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 6977e6942..e4a300f9f 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -71,7 +71,7 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(Vertabreaker)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(Vertabreaker+Asaril)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 #include "Start_here.h"
 
@@ -173,7 +173,7 @@
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like http://www.uuidgenerator.net/version4
-#define MACHINE_UUID "836fa943-1337-1337-1337-98a20de75607"
+#define MACHINE_UUID "74ed451a-5c3a-40b7-a9d6-05fd7aa73366"
 
 // @section extruder
 
@@ -1341,9 +1341,9 @@
 #define Y_BED_SIZE 165
 #define Z_MAX_POS 155
 #elif ENABLED (GTA10)
-#define X_BED_SIZE 230
-#define Y_BED_SIZE 230
-#define Z_MAX_POS 250
+#define X_BED_SIZE 227
+#define Y_BED_SIZE 227
+#define Z_MAX_POS 247
 #endif
 
 #define X_MIN_POS XMP
diff --git a/Marlin/Start_here.h b/Marlin/Start_here.h
index eecbc5ac9..1daa18e9d 100644
--- a/Marlin/Start_here.h
+++ b/Marlin/Start_here.h
@@ -22,8 +22,8 @@
 //#define GTD200      // D200 - experimental, set jumpers base on board for flashing and use serial to upload.
 //--------------------------------------------------------------------------------------------------------------------------------------------------------
 //Step 2) enable 1 driver timing set. 
-//#define STOCK     // Enable A4988   on all drivers (stock drivers)
-#define T2208    // Enable TMC2208 Standalone on all drivers
+#define STOCK     // Enable A4988   on all drivers (stock drivers)
+// #define T2208    // Enable TMC2208 Standalone on all drivers
 //#define T2209    // Enable TMC2209 Standalone on all drivers
 //#define T2130    // Enable TMC2130 Standalone on all drivers
 //#define T2160    // Enable TMC2160 Standalone on all drivers
@@ -41,12 +41,12 @@
 //--------------------------------------------------------------------------------------------------------------------------------------------------------
 //Step 3) enable if needed to invert motors direction used on TMC drivers & Geared extruders.
 #define INVERTE     // Invert E direction disabe if wrong direction - M & T variants inverted (stock).
-#define INVERTXYZ   // Invert XYZ direction disable if wrong direction.
+// #define INVERTXYZ   // Invert XYZ direction disable if wrong direction.
 //--------------------------------------------------------------------------------------------------------------------------------------------------------
 //Step 4) enable 1 if you have mixing or multi extruder.
-//#define MIX      // Enable Mixing    2 in 1 - Virtual Motor Control 
+#define MIX      // Enable Mixing    2 in 1 - Virtual Motor Control 
 //#define MIXT     // Enable Mixing    3 in 1 - Virtual Motor Control
-//#define CYCLOPS  // Enable Cyclops   2 in 1 - Physical Motor Control
+// #define CYCLOPS  // Enable Cyclops   2 in 1 - Physical Motor Control
 //#define CYCLOPST // Enable Cyclops   3 in 1 - Physical Motor Control
 //#define DUALEX   // 2 Extruder       2 in 2 - Physical Motor Control 
 //#define TRIEX    // 3 Extruder       3 in 3 - Physical Motor Control 
@@ -59,17 +59,17 @@
 //Other variables DO NOT DISABLE edit only.
 #define XMP -11         // X Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at X0.
 #define YMP -4          // Y Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at Y0.
-#define MPE 0           // As needed 30 Max if you have bed clips, if set to large it will cause max X crash.
+#define MPE 10           // As needed 30 Max if you have bed clips, if set to large it will cause max X crash.
 #define GRIDSIZE 5      // 5x5 mesh grid adjust as needed.
 #define ZPROBESPEED 120 // Probe speed reduce if accuracy is poor.
-#define G26NOZZLE 1.0   // Nozzle size for G26
-#define G26HOTEND 250   // Hotend temp for G26
-#define G26BED    70    // Bed temp for G26
+#define G26NOZZLE 0.4   // Nozzle size for G26
+#define G26HOTEND 195   // Hotend temp for G26
+#define G26BED    60    // Bed temp for G26
 
 #if DISABLED (MIX) && DISABLED (CYCLOPS) && DISABLED (DUALEX) && DISABLED (MIXT) && DISABLED (CYCLOPST) && DISABLED (TRIEX)
 #define NPO { -38, 4, 0 } // Nozzle To Probe offset XYZ A10/A20 calibration suggested. 
 #elif ENABLED (MIX) || ENABLED (CYCLOPS) || ENABLED (DUALEX) || ENABLED (MIXT) || ENABLED (CYCLOPST) || ENABLED (TRIEX)
-#define NPO { -40, 0, 0 }  // Nozzle To Probe offset XYZ A10M/A20M calibration suggested.
+#define NPO { -40, 3, 0 }  // Nozzle To Probe offset XYZ A10M/A20M calibration suggested.
 #else
 #error No probe offsets defined
 #endif