3d/marlin2_a10m
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

reduced setup to 5 steps

Browse source 
added editable variables to the bottom of the list and some logic that helped reduce steps by 1
This commit is contained in:
Vertabreaker 2019-12-13 11:05:02 -05:00 • committed by GitHub
parent 8982fb7e92
commit b08a108a9d
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 23 additions and 23 deletions

46
Marlin/Start_here.h
View file

@ -51,7 +51,29 @@
//#define CYCLOPST // Enable Cyclops 3 in 1 - Physical Motor Control
//#define TRIEX // 3 Extruder 3 in 3 - Physical Motor Control
//--------------------------------------------------------------------------------------------------------------------------------------------------------
//Step 5) Adjust XYZE if required, suggest you run your own calibrations.
//Step 5) enable 1 probe type & edit other bed leveling options.
#define TOUCHPROBE // Enable Bltouch Type Probe.
//#define FMP // Enable Fixed Mounted Type Probe.
//#define MANUALBL // Enable Manual Bed Leveling (stock)
//--------------------------------------------------------------------------------------------------------------------------------------------------------
//Other variables DO NOT DISABLE edit only.
#define XMP -11 // X Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at X0.
#define YMP -4 // Y Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at Y0.
#define MPE 0 // As needed 30 Max if you have bed clips, if set to large it will cause max X crash.
#define GRIDSIZE 5 // 5x5 mesh grid adjust as needed.
#define ZPROBESPEED 120 // Probe speed reduce if accuracy is poor.
#define G26NOZZLE 1.0 // Nozzle size for G26
#define G26HOTEND 250 // Hotend temp for G26
#define G26BED 70 // Bed temp for G26
#if DISABLED (MIX) && DISABLED (CYCLOPS) && DISABLED (DUALEX) && DISABLED (MIXT) && DISABLED (CYCLOPST) && DISABLED (TRIEX)
#define NPO { -38, 4, 0 } // Nozzle To Probe offset XYZ A10/A20 calibration suggested.
#elif ENABLED (MIX) || ENABLED (CYCLOPS) || ENABLED (DUALEX) || ENABLED (MIXT) || ENABLED (CYCLOPST) || ENABLED (TRIEX)
#define NPO { -40, 0, 0 } // Nozzle To Probe offset XYZ A10M/A20M calibration suggested.
#else
#error No probe offsets defined
#endif
#if DISABLED (MIX) && DISABLED (CYCLOPS) && DISABLED (DUALEX) && DISABLED (MIXT) && DISABLED (CYCLOPST) && DISABLED (TRIEX)
#define XYZESTEPS { 80, 80, 400, 98 } // ungeared extruder found on a10/a20/a30/i3pro.
//#define XYZESTEPS { 80, 80, 2560, 98 } // M8 Z rod steps 2560 found on old I3pro.
@ -64,26 +86,4 @@
#else
#error No steps defined
#endif
//--------------------------------------------------------------------------------------------------------------------------------------------------------
//Step 6) enable 1 probe type & edit other bed leveling options.
#define TOUCHPROBE // Enable Bltouch Type Probe.
//#define FMP // Enable Fixed Mounted Type Probe.
//#define MANUALBL // Enable Manual Bed Leveling (stock)
//Other bed leveling variables DO NOT DISABLE edit only.
#define XMP -11 // X Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at X0.
#define YMP -4 // Y Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at Y0.
#define MPE 0 // As needed 30 Max if you have bed clips, if set to large it will cause max X crash .
#define GRIDSIZE 5 // 5x5 mesh grid adjust as needed.
#define ZPROBESPEED 120 // Probe speed reduce if accuracy is poor.
#define G26NOZZLE 1.0 // Nozzle size for G26
#define G26HOTEND 250 // Hotend temp for G26
#define G26BED 70 // Bed temp for G26
#if DISABLED (MIX) && DISABLED (CYCLOPS) && DISABLED (DUALEX) && DISABLED (MIXT) && DISABLED (CYCLOPST) && DISABLED (TRIEX)
#define NPO { -38, 4, 0 } // Nozzle To Probe offset XYZ A10/A20 calibration suggested.
#elif ENABLED (MIX) || ENABLED (CYCLOPS) || ENABLED (DUALEX) || ENABLED (MIXT) || ENABLED (CYCLOPST) || ENABLED (TRIEX)
#define NPO { -40, 0, 0 } // Nozzle To Probe offset XYZ A10M/A20M calibration suggested.
#else
#error No probe offsets defined
#endif
//--------------------------------------------------------------------------------------------------------------------------------------------------------