#pragma once #define SHORT_BUILD_VERSION "B447" // = disabled - remove // enabled //Step 1) enable 1 model. //GT2560 Boards - Mega2560 8bit - Arduino Librarys: U8glib Library required for Step 6 variants. #define GTA10 // A10 & Variants - tested working //#define GTA20 // A20 & Variants - tested working //#define MECREATOR2 // Mecreator2 - tested working //#define I3PROA // PI3A Pro - testing //#define I3PROB // I3PROB - testing //#define I3PROC // I3PROC - testing //#define I3PROW // I3PROW - testing //#define I3PROX // I3PROX - testing //GTM32 Boards - STM32F103VE 32bit - Arduino Librarys : https://github.com/rogerclarkmelbourne/Arduino_STM32 & https://github.com/stm32duino/Arduino_Core_STM32 //Delete folder /Marlin-bugfix-2.0.x/Marlin/src/HAL/HAL_STM32 & Delete All but SPI.h in Folder Arduino_STM32-master/STM32F1/libraries/SPI/src/ //#define GTA30 // A30 - Tested mostly works - set jumpers base on board for flashing and use serial to upload. //#define GTE180 // E180 - Tested mostly works - set jumpers base on board for flashing and use serial to upload. //#define GTM201 // M201 - experimental, set jumpers base on board for flashing and use serial to upload. //#define GTD200 // D200 - experimental, set jumpers base on board for flashing and use serial to upload. //-------------------------------------------------------------------------------------------------------------------------------------------------------- //Step 2) enable 1 driver timing set. // #define STOCK // Enable A4988 on all drivers (stock drivers) // #define T2208 // Enable TMC2208 Standalone on all drivers //#define T2209 // Enable TMC2209 Standalone on all drivers //#define T2130 // Enable TMC2130 Standalone on all drivers //#define T2160 // Enable TMC2160 Standalone on all drivers //#define T26X // Enable TMC226X Standalone on all drivers //#define T2660 // Enable TMC2660 Standalone on all drivers //#define T5130 // Enable TMC5130 Standalone on all drivers //#define T5160 // Enable TMC5160 Standalone on all drivers //#define A598 // Enable A5984 on all drivers //#define D8825 // Enable DRV8825 on all drivers //#define L8729 // Enable LV8729 on all drivers //#define L647 // Enable L6470 on all drivers //#define T6560 // Enable TB6560 on all drivers //#define T6600 // Enable TB6600 on all drivers #define CUSTOM // Fill in #elif ENABLED (CUSTOM) in configuration.h with a custom set & invert in step 3 as needed //-------------------------------------------------------------------------------------------------------------------------------------------------------- //Step 3) enable if needed to invert motors direction used on TMC drivers & Geared extruders. // #define INVERTE // Invert E direction disabe if wrong direction - M & T variants inverted (stock). #define INVERTXYZ // Invert XYZ direction disable if wrong direction. //-------------------------------------------------------------------------------------------------------------------------------------------------------- //Step 4) enable 1 if you have mixing or multi extruder. #define MIX // Enable Mixing 2 in 1 - Virtual Motor Control //#define MIXT // Enable Mixing 3 in 1 - Virtual Motor Control // #define CYCLOPS // Enable Cyclops 2 in 1 - Physical Motor Control //#define CYCLOPST // Enable Cyclops 3 in 1 - Physical Motor Control //#define DUALEX // 2 Extruder 2 in 2 - Physical Motor Control //#define TRIEX // 3 Extruder 3 in 3 - Physical Motor Control //-------------------------------------------------------------------------------------------------------------------------------------------------------- //Step 5) enable 1 probe type & edit other bed leveling options. //#define MANUALBL // Enable Manual Bed Leveling (stock) #define TOUCHPROBE // Enable Bltouch Type Probe. //#define FMP // Enable Fixed Mounted Type Probe. //-------------------------------------------------------------------------------------------------------------------------------------------------------- //Other variables DO NOT DISABLE edit only. #define XMP -11 // X Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at X0. #define YMP -4 // Y Min Position - distance from the endstop to the bed, adjust nozzle to the front left bed edge at Y0. #define MPE 10 // As needed 30 Max if you have bed clips, if set to large it will cause max X crash. #define GRIDSIZE 5 // 5x5 mesh grid adjust as needed. #define ZPROBESPEED 120 // Probe speed reduce if accuracy is poor. #define G26NOZZLE 0.4 // Nozzle size for G26 #define G26HOTEND 195 // Hotend temp for G26 #define G26BED 60 // Bed temp for G26 #if DISABLED (MIX) && DISABLED (CYCLOPS) && DISABLED (DUALEX) && DISABLED (MIXT) && DISABLED (CYCLOPST) && DISABLED (TRIEX) #define NPO { -38, 4, 0 } // Nozzle To Probe offset XYZ A10/A20 calibration suggested. #elif ENABLED (MIX) || ENABLED (CYCLOPS) || ENABLED (DUALEX) || ENABLED (MIXT) || ENABLED (CYCLOPST) || ENABLED (TRIEX) #define NPO { -40, 3, 0 } // Nozzle To Probe offset XYZ A10M/A20M calibration suggested. #else #error No probe offsets defined #endif #if DISABLED (MIX) && DISABLED (CYCLOPS) && DISABLED (DUALEX) && DISABLED (MIXT) && DISABLED (CYCLOPST) && DISABLED (TRIEX) #define XYZESTEPS { 80, 80, 400, 98 } // ungeared extruder found on a10/a20/a30/i3pro. //#define XYZESTEPS { 80, 80, 2560, 98 } // M8 Z rod steps 2560 found on old I3pro. #elif ENABLED (MIX) || ENABLED (CYCLOPS) || ENABLED (DUALEX) #define XYZESTEPS { 80, 80, 400, 430, 430 } // geared extruder found on M & T variants. //#define XYZESTEPS { 80, 80, 2560,430, 430 } // M8 Z rod steps 2560 found on old I3pro #elif ENABLED (MIXT) || ENABLED (CYCLOPST) || ENABLED (TRIEX) #define XYZESTEPS { 80, 80, 400, 430, 430, 430 } // geared extruder found on M & T variants. //#define XYZESTEPS { 80, 80, 2560,430, 430, 430 } // M8 Z rod steps 2560 found on old I3pro #else #error No steps defined #endif