WS2811 DMA

- Added Settings for WS2811
2019-03-07 12:49:30 -05:00 · 2019-03-07 12:49:30 -05:00 · 6f188d455a
commit 6f188d455a
parent 7539888d6d
5 changed files with 55 additions and 24 deletions
--- a/Arduino/McLighting/McLighting.ino
+++ b/Arduino/McLighting/McLighting.ino
@ -91,26 +91,49 @@ WS2812FX* strip;
 #include <NeoPixelBus.h>

 #ifdef USE_WS2812FX_DMA // Uses GPIO3/RXD0/RX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  NeoEsp8266Dma800KbpsMethod* dma;
+  #ifndef LED_TYPE_WS2811 
+    NeoEsp8266Dma800KbpsMethod* dma; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    NeoEsp8266Dma400KbpsMethod* dma;  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART1 // Uses UART1: GPIO1/TXD0/TX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  NeoEsp8266Uart0800KbpsMethod* dma;
+  #ifndef LED_TYPE_WS2811
+    NeoEsp8266Uart0800KbpsMethod* dma; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    NeoEsp8266Uart0400KbpsMethod* dma; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART2 // Uses UART2: GPIO2/TXD1/D4, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  NeoEsp8266Uart1800KbpsMethod* dma;
+  #ifndef LED_TYPE_WS2811
+    NeoEsp8266Uart1800KbpsMethod* dma; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    NeoEsp8266Uart1400KbpsMethod* dma; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif

 void initDMA(uint16_t stripSize = NUMLEDS){
  if (dma) delete dma;
 #ifdef USE_WS2812FX_DMA // Uses GPIO3/RXD0/RX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
+  #ifndef LED_TYPE_WS2811
    dma = new NeoEsp8266Dma800KbpsMethod(stripSize, 3);  //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
-  //NeoEsp8266Dma400KbpsMethod dma = NeoEsp8266Dma400KbpsMethod(NUMLEDS, 3);  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #else
+    dma = new NeoEsp8266Dma400KbpsMethod(stripSize, 3);  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART1 // Uses UART1: GPIO1/TXD0/TX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  dma = new NeoEsp8266Uart0800KbpsMethod(stripSize, 3);
+  #ifndef LED_TYPE_WS2811
+    dma = new NeoEsp8266Uart0800KbpsMethod(stripSize, 3); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    dma = new NeoEsp8266Uart0400KbpsMethod(stripSize, 3); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART2 // Uses UART2: GPIO2/TXD1/D4, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  dma = new NeoEsp8266Uart1800KbpsMethod(stripSize, 3);
+  #ifndef LED_TYPE_WS2811
+    dma = new NeoEsp8266Uart1800KbpsMethod(stripSize, 3); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    dma = new NeoEsp8266Uart1400KbpsMethod(stripSize, 3); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
  dma->Initialize();
 }
@ -241,7 +264,11 @@ void initStrip(uint16_t stripSize = WS2812FXStripSettings.stripSize, neoPixelTyp
    WS2812FXStripSettings.RGBOrder = RGBOrder;
    WS2812FXStripSettings.pin = pin;
  }
+  #ifndef LED_TYPE_WS2811
    strip = new WS2812FX(stripSize, pin, RGBOrder + NEO_KHZ800);
+  #else
+    strip = new WS2812FX(stripSize, pin, RGBOrder + NEO_KHZ400);
+  #endif
  // Parameter 1 = number of pixels in strip
  // Parameter 2 = Arduino pin number (most are valid)
  // Parameter 3 = pixel type flags, add together as needed:
--- a/Arduino/McLighting/definitions.h
+++ b/Arduino/McLighting/definitions.h
@ -5,6 +5,7 @@
 // Neopixel
 #define LED_PIN 14       // LED_PIN (14 / D5) where neopixel / WS2811 strip is attached
 #define NUMLEDS 24       // Number of leds in the strip
+#define LED_TYPE_WS2811  // Uncomment if LED type uses 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
 #define BUILTIN_LED 2    // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192
 #define BUTTON 4         // Input pin (4 / D2) for switching the LED strip on / off, connect this PIN to ground to trigger button.

--- a/Arduino/McLighting/version.h
+++ b/Arduino/McLighting/version.h
@ -1 +1 @@
-#define SKETCH_VERSION "2.2.1"
+#define SKETCH_VERSION "2.2.2"
--- a/Arduino/McLighting/version_info.ino
+++ b/Arduino/McLighting/version_info.ino
@ -56,11 +56,11 @@
 * 23 Dec 2018 v 2.2.0 
 * - Add E1.31 mode to getModes(), no need to change McLightingUI
 * 
- * 6 Jan 2018 v 2.2.0
+ * 6 Jan 2019 v 2.2.0
 * - fix webserver not responding when E1.31 is mode is acivated: do a webserver.loop() for every 1.31 packet
 * - HA E1.31 mode added
 * 
- * 24 Jan 2018 v 2.2.1
+ * 24 Jan 2019 v 2.2.1
 * - checkForRequests() is vital for e131 mode, remove from #ifdef ENABLE_LEGACY_ANIMATIONS
 * - Minor fixes related to NeoPixelBus UART methods
 * - Modify platformio.ini for future bump to esp8266-arduino v2.5.0 (shamelessly stolen settings from espurna project)
@ -78,4 +78,7 @@
 * - Rename varaibles to be char instead of String
 * - Added LED pixel count and PIN settings to WiFiManager
 * - Gamma correction to LEDs
+ * 
+ * 7 Mar 2019 v 2.2.2
+ * - Add compiler flag for WS2811 strips #define LED_TYPE_WS2811
 */
--- a/platformio.ini
+++ b/platformio.ini
@ -41,7 +41,7 @@ lib_deps =
  AsyncMqttClient
  https://github.com/bblanchon/ArduinoJson.git#v6.8.0-beta
  WS2812FX
-  NeoPixelBus@2.4.2
+  NeoPixelBus
  WebSockets
  ESPAsyncE131
  ESPAsyncUDP
@ -50,17 +50,6 @@ lib_deps =
 targets_eum = erase, upload, monitor
 targets_um = upload, monitor

-[env:esp01_1m]
-board = esp01_1m
-framework = ${common.framework}
-platform = ${common.platform}
-build_flags = ${common.build_flags} -D D1=2
-monitor_speed = ${common.monitor_speed}
-upload_speed = ${common.upload_speed}
-upload_resetmethod = ${common.upload_resetmethod}
-board_build.flash_mode = dout
-lib_deps = ${common.lib_deps}
-
 [env:nodemcuv2]
 board = nodemcuv2
 framework = ${common.framework}
@ -73,3 +62,14 @@ upload_speed = ${common.upload_speed}
 upload_resetmethod = ${common.upload_resetmethod}
 lib_deps = ${common.lib_deps}
 ; targets = ${common.targets_um}
+
+[env:esp01_1m]
+board = esp01_1m
+framework = ${common.framework}
+platform = ${common.platform}
+build_flags = ${common.build_flags} -D D1=2
+monitor_speed = ${common.monitor_speed}
+upload_speed = ${common.upload_speed}
+upload_resetmethod = ${common.upload_resetmethod}
+board_build.flash_mode = dout
+lib_deps = ${common.lib_deps}