diff --git a/Arduino/McLighting/McLighting.ino b/Arduino/McLighting/McLighting.ino
index b17f83a..89a63ae 100644
--- a/Arduino/McLighting/McLighting.ino
+++ b/Arduino/McLighting/McLighting.ino
@@ -91,26 +91,49 @@ WS2812FX* strip;
 #include <NeoPixelBus.h>
 
 #ifdef USE_WS2812FX_DMA // Uses GPIO3/RXD0/RX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  NeoEsp8266Dma800KbpsMethod* dma;
+  #ifndef LED_TYPE_WS2811 
+    NeoEsp8266Dma800KbpsMethod* dma; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    NeoEsp8266Dma400KbpsMethod* dma;  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART1 // Uses UART1: GPIO1/TXD0/TX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  NeoEsp8266Uart0800KbpsMethod* dma;
+  #ifndef LED_TYPE_WS2811
+    NeoEsp8266Uart0800KbpsMethod* dma; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    NeoEsp8266Uart0400KbpsMethod* dma; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART2 // Uses UART2: GPIO2/TXD1/D4, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  NeoEsp8266Uart1800KbpsMethod* dma;
+  #ifndef LED_TYPE_WS2811
+    NeoEsp8266Uart1800KbpsMethod* dma; //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    NeoEsp8266Uart1400KbpsMethod* dma; //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 
 void initDMA(uint16_t stripSize = NUMLEDS){
   if (dma) delete dma;
 #ifdef USE_WS2812FX_DMA // Uses GPIO3/RXD0/RX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  dma = new NeoEsp8266Dma800KbpsMethod(stripSize, 3);  //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
-  //NeoEsp8266Dma400KbpsMethod dma = NeoEsp8266Dma400KbpsMethod(NUMLEDS, 3);  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #ifndef LED_TYPE_WS2811
+    dma = new NeoEsp8266Dma800KbpsMethod(stripSize, 3);  //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    dma = new NeoEsp8266Dma400KbpsMethod(stripSize, 3);  //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART1 // Uses UART1: GPIO1/TXD0/TX, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  dma = new NeoEsp8266Uart0800KbpsMethod(stripSize, 3);
+  #ifndef LED_TYPE_WS2811
+    dma = new NeoEsp8266Uart0800KbpsMethod(stripSize, 3); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    dma = new NeoEsp8266Uart0400KbpsMethod(stripSize, 3); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
 #ifdef USE_WS2812FX_UART2 // Uses UART2: GPIO2/TXD1/D4, more info: https://github.com/Makuna/NeoPixelBus/wiki/ESP8266-NeoMethods
-  dma = new NeoEsp8266Uart1800KbpsMethod(stripSize, 3);
+  #ifndef LED_TYPE_WS2811
+    dma = new NeoEsp8266Uart1800KbpsMethod(stripSize, 3); //800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
+  #else
+    dma = new NeoEsp8266Uart1400KbpsMethod(stripSize, 3); //400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
+  #endif
 #endif
   dma->Initialize();
 }
@@ -241,7 +264,11 @@ void initStrip(uint16_t stripSize = WS2812FXStripSettings.stripSize, neoPixelTyp
     WS2812FXStripSettings.RGBOrder = RGBOrder;
     WS2812FXStripSettings.pin = pin;
   }
-  strip = new WS2812FX(stripSize, pin, RGBOrder + NEO_KHZ800);
+  #ifndef LED_TYPE_WS2811
+    strip = new WS2812FX(stripSize, pin, RGBOrder + NEO_KHZ800);
+  #else
+    strip = new WS2812FX(stripSize, pin, RGBOrder + NEO_KHZ400);
+  #endif
   // Parameter 1 = number of pixels in strip
   // Parameter 2 = Arduino pin number (most are valid)
   // Parameter 3 = pixel type flags, add together as needed:
@@ -862,7 +889,7 @@ void setup() {
     
     DynamicJsonDocument jsonBuffer(200);
     JsonObject json = jsonBuffer.to<JsonObject>();
-    json["pixel_pount"] = WS2812FXStripSettings.stripSize;
+    json["pixel_count"] = WS2812FXStripSettings.stripSize;
     json["rgb_order"] = WS2812FXStripSettings.RGBOrder;
     json["pin"] = WS2812FXStripSettings.pin;
     String json_str;
diff --git a/Arduino/McLighting/definitions.h b/Arduino/McLighting/definitions.h
index 5f6c7a5..dc02cc5 100644
--- a/Arduino/McLighting/definitions.h
+++ b/Arduino/McLighting/definitions.h
@@ -5,6 +5,7 @@
 // Neopixel
 #define LED_PIN 14       // LED_PIN (14 / D5) where neopixel / WS2811 strip is attached
 #define NUMLEDS 24       // Number of leds in the strip
+//#define LED_TYPE_WS2811  // Uncomment if LED type uses 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
 #define BUILTIN_LED 2    // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192
 #define BUTTON 4         // Input pin (4 / D2) for switching the LED strip on / off, connect this PIN to ground to trigger button.
 
diff --git a/Arduino/McLighting/request_handlers.h b/Arduino/McLighting/request_handlers.h
index 4ba7210..4f0f445 100644
--- a/Arduino/McLighting/request_handlers.h
+++ b/Arduino/McLighting/request_handlers.h
@@ -1412,7 +1412,9 @@ bool readStateFS() {
         main_color.green = json["green"];
         main_color.blue = json["blue"];
 
-        if(mode != OFF) stateOn = true; 
+        #ifdef ENABLE_HOMEASSISTANT
+          if(mode != OFF) stateOn = true;
+        #endif
         strip->setMode(ws2812fx_mode);
         strip->setSpeed(convertSpeed(ws2812fx_speed));
         strip->setBrightness(brightness);
diff --git a/Arduino/McLighting/version.h b/Arduino/McLighting/version.h
index ce383bd..08832bb 100644
--- a/Arduino/McLighting/version.h
+++ b/Arduino/McLighting/version.h
@@ -1 +1 @@
-#define SKETCH_VERSION "2.2.1"
\ No newline at end of file
+#define SKETCH_VERSION "2.2.2"
\ No newline at end of file
diff --git a/Arduino/McLighting/version_info.ino b/Arduino/McLighting/version_info.ino
index 2b2fbb1..2764ee5 100644
--- a/Arduino/McLighting/version_info.ino
+++ b/Arduino/McLighting/version_info.ino
@@ -56,11 +56,11 @@
  * 23 Dec 2018 v 2.2.0 
  * - Add E1.31 mode to getModes(), no need to change McLightingUI
  * 
- * 6 Jan 2018 v 2.2.0
+ * 6 Jan 2019 v 2.2.0
  * - fix webserver not responding when E1.31 is mode is acivated: do a webserver.loop() for every 1.31 packet
  * - HA E1.31 mode added
  * 
- * 24 Jan 2018 v 2.2.1
+ * 24 Jan 2019 v 2.2.1
  * - checkForRequests() is vital for e131 mode, remove from #ifdef ENABLE_LEGACY_ANIMATIONS
  * - Minor fixes related to NeoPixelBus UART methods
  * - Modify platformio.ini for future bump to esp8266-arduino v2.5.0 (shamelessly stolen settings from espurna project)
@@ -78,4 +78,8 @@
  * - Rename varaibles to be char instead of String
  * - Added LED pixel count and PIN settings to WiFiManager
  * - Gamma correction to LEDs
+ * 
+ * 7 Mar 2019 v 2.2.2
+ * - Add compiler flag for WS2811 strips #define LED_TYPE_WS2811
+ * - Hotfix #351
  */
diff --git a/README.md b/README.md
index a95aec5..73b89d5 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # McLighting v2 - The ESP8266 based multi-client lighting gadget
 
-[![Gitter](https://badges.gitter.im/mclighting/Lobby.svg)](https://gitter.im/mclighting/Lobby?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) [![Build Status](https://travis-ci.com/toblum/McLighting.svg?branch=master)](https://travis-ci.com/toblum/McLighting) [![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT) [![version](https://img.shields.io/badge/version-v2.2.1-blue.svg)](https://github.com/toblum/McLighting/blob/master/Arduino/McLighting/version.h)
+[![Gitter](https://badges.gitter.im/mclighting/Lobby.svg)](https://gitter.im/mclighting/Lobby?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) [![Build Status](https://travis-ci.com/toblum/McLighting.svg?branch=master)](https://travis-ci.com/toblum/McLighting) [![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](https://opensource.org/licenses/MIT) [![version](https://img.shields.io/badge/version-v2.2.2-blue.svg)](https://github.com/toblum/McLighting/blob/master/Arduino/McLighting/version.h)
 
 McLighting (the multi-client lighting gadget) is a very cheap internet-controllable lighting solution based on the famous ESP8266 microcontroller and WS2811/2812 led strips. It features among other things a web-interface, a REST-API and a websocket connector.
 
diff --git a/platformio.ini b/platformio.ini
index fee5b1f..d3dc3c1 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -41,7 +41,7 @@ lib_deps =
   AsyncMqttClient
   https://github.com/bblanchon/ArduinoJson.git#v6.8.0-beta
   WS2812FX
-  NeoPixelBus@2.4.2
+  NeoPixelBus
   WebSockets
   ESPAsyncE131
   ESPAsyncUDP
@@ -50,17 +50,6 @@ lib_deps =
 targets_eum = erase, upload, monitor
 targets_um = upload, monitor
 
-[env:esp01_1m]
-board = esp01_1m
-framework = ${common.framework}
-platform = ${common.platform}
-build_flags = ${common.build_flags} -D D1=2
-monitor_speed = ${common.monitor_speed}
-upload_speed = ${common.upload_speed}
-upload_resetmethod = ${common.upload_resetmethod}
-board_build.flash_mode = dout
-lib_deps = ${common.lib_deps}
-
 [env:nodemcuv2]
 board = nodemcuv2
 framework = ${common.framework}
@@ -72,4 +61,15 @@ monitor_speed = ${common.monitor_speed}
 upload_speed = ${common.upload_speed}
 upload_resetmethod = ${common.upload_resetmethod}
 lib_deps = ${common.lib_deps}
-; targets = ${common.targets_um}
\ No newline at end of file
+; targets = ${common.targets_um}
+
+[env:esp01_1m]
+board = esp01_1m
+framework = ${common.framework}
+platform = ${common.platform}
+build_flags = ${common.build_flags} -D D1=2
+monitor_speed = ${common.monitor_speed}
+upload_speed = ${common.upload_speed}
+upload_resetmethod = ${common.upload_resetmethod}
+board_build.flash_mode = dout
+lib_deps = ${common.lib_deps}
\ No newline at end of file