diff --git a/Arduino/McLighting/definitions.h b/Arduino/McLighting/definitions.h index 2309066..993e0d0 100644 --- a/Arduino/McLighting/definitions.h +++ b/Arduino/McLighting/definitions.h @@ -1,90 +1,91 @@ -// Neopixel -#define PIN 5 // PIN (5 / D1) where neopixel / WS2811 strip is attached -#define NUMLEDS 24 // Number of leds in the strip -//#define BUILTIN_LED 2 // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192 -#define BUTTON 4 // Input pin (4 / D2) for switching the LED strip on / off, connect this PIN to ground to trigger button. - -const char HOSTNAME[] = "ESP8266_01"; // Friedly hostname - -#define ENABLE_OTA // If defined, enable Arduino OTA code. -#define ENABLE_MQTT // If defined, enable MQTT client code, see: https://github.com/toblum/McLighting/wiki/MQTT-API -// #define ENABLE_BUTTON // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control - -// parameters for automatically cycling favorite patterns -uint32_t autoParams[][4] = { // color, speed, mode, duration (seconds) - {0xff0000, 200, 1, 5.0}, // blink red for 5 seconds - {0x00ff00, 200, 3, 10.0}, // wipe green for 10 seconds - {0x0000ff, 200, 11, 5.0}, // dual scan blue for 5 seconds - {0x0000ff, 200, 42, 15.0} // fireworks for 15 seconds -}; - -#ifdef ENABLE_MQTT - #define MQTT_MAX_PACKET_SIZE 256 - #define MQTT_MAX_RECONNECT_TRIES 4 - - int mqtt_reconnect_retries = 0; - char mqtt_intopic[strlen(HOSTNAME) + 4]; // Topic in will be: /in - char mqtt_outtopic[strlen(HOSTNAME) + 5]; // Topic out will be: /out - - const char mqtt_clientid[] = "ESP8266Client"; // MQTT ClientID - - char mqtt_host[64] = ""; - char mqtt_port[6] = ""; - char mqtt_user[32] = ""; - char mqtt_pass[32] = ""; -#endif - - -// *************************************************************************** -// Global variables / definitions -// *************************************************************************** -#define DBG_OUTPUT_PORT Serial // Set debug output port - -// List of all color modes -enum MODE { SET_MODE, HOLD, OFF, ALL, WIPE, RAINBOW, RAINBOWCYCLE, THEATERCHASE, TWINKLERANDOM, THEATERCHASERAINBOW, TV, CUSTOM }; - -MODE mode = RAINBOW; // Standard mode that is active when software starts - -int ws2812fx_speed = 196; // Global variable for storing the delay between color changes --> smaller == faster -int brightness = 196; // Global variable for storing the brightness (255 == 100%) - -int ws2812fx_mode = 0; // Helper variable to set WS2812FX modes - -bool exit_func = false; // Global helper variable to get out of the color modes when mode changes - -bool shouldSaveConfig = false; // For WiFiManger custom config - -struct ledstate // Data structure to store a state of a single led -{ - uint8_t red; - uint8_t green; - uint8_t blue; -}; - -typedef struct ledstate LEDState; // Define the datatype LEDState -LEDState ledstates[NUMLEDS]; // Get an array of led states to store the state of the whole strip -LEDState main_color = { 255, 0, 0 }; // Store the "main color" of the strip used in single color modes - -#define ENABLE_STATE_SAVE // If defined, save state on reboot -#ifdef ENABLE_STATE_SAVE - char current_state[32]; // Keeps the current state representation - char last_state[32]; // Save the last state as string representation - unsigned long time_statechange = 0; // Time when the state last changed - int timeout_statechange_save = 5000; // Timeout in ms to wait before state is saved - bool state_save_requested = false; // State has to be saved after timeout -#endif - -// Button handling -#ifdef ENABLE_BUTTON - #define BTN_MODE_SHORT "STA| 1| 0|245|196|255|255|255" // Static white - #define BTN_MODE_MEDIUM "STA| 1| 48|245|196|255|102| 0" // Fire flicker - #define BTN_MODE_LONG "STA| 1| 46|253|196|255|102| 0" // Fireworks random - - unsigned long keyPrevMillis = 0; - const unsigned long keySampleIntervalMs = 25; - byte longKeyPressCountMax = 80; // 80 * 25 = 2000 ms - byte mediumKeyPressCountMin = 20; // 20 * 25 = 500 ms - byte KeyPressCount = 0; - byte prevKeyState = HIGH; // button is active low - boolean buttonState = false; +// Neopixel +#define PIN 5 // PIN (5 / D1) where neopixel / WS2811 strip is attached +#define NUMLEDS 24 // Number of leds in the strip +//#define BUILTIN_LED 2 // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192 +#define BUTTON 4 // Input pin (4 / D2) for switching the LED strip on / off, connect this PIN to ground to trigger button. + +const char HOSTNAME[] = "ESP8266_01"; // Friedly hostname + +#define HTTP_OTA // If defined, enable Added ESP8266HTTPUpdateServer +//#define ENABLE_OTA // If defined, enable Arduino OTA code. +#define ENABLE_MQTT // If defined, enable MQTT client code, see: https://github.com/toblum/McLighting/wiki/MQTT-API +// #define ENABLE_BUTTON // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control + +// parameters for automatically cycling favorite patterns +uint32_t autoParams[][4] = { // color, speed, mode, duration (seconds) + {0xff0000, 200, 1, 5.0}, // blink red for 5 seconds + {0x00ff00, 200, 3, 10.0}, // wipe green for 10 seconds + {0x0000ff, 200, 11, 5.0}, // dual scan blue for 5 seconds + {0x0000ff, 200, 42, 15.0} // fireworks for 15 seconds +}; + +#ifdef ENABLE_MQTT + #define MQTT_MAX_PACKET_SIZE 256 + #define MQTT_MAX_RECONNECT_TRIES 4 + + int mqtt_reconnect_retries = 0; + char mqtt_intopic[strlen(HOSTNAME) + 4]; // Topic in will be: /in + char mqtt_outtopic[strlen(HOSTNAME) + 5]; // Topic out will be: /out + + const char mqtt_clientid[] = "ESP8266Client"; // MQTT ClientID + + char mqtt_host[64] = ""; + char mqtt_port[6] = ""; + char mqtt_user[32] = ""; + char mqtt_pass[32] = ""; +#endif + + +// *************************************************************************** +// Global variables / definitions +// *************************************************************************** +#define DBG_OUTPUT_PORT Serial // Set debug output port + +// List of all color modes +enum MODE { SET_MODE, HOLD, OFF, ALL, WIPE, RAINBOW, RAINBOWCYCLE, THEATERCHASE, TWINKLERANDOM, THEATERCHASERAINBOW, TV, CUSTOM }; + +MODE mode = RAINBOW; // Standard mode that is active when software starts + +int ws2812fx_speed = 196; // Global variable for storing the delay between color changes --> smaller == faster +int brightness = 196; // Global variable for storing the brightness (255 == 100%) + +int ws2812fx_mode = 0; // Helper variable to set WS2812FX modes + +bool exit_func = false; // Global helper variable to get out of the color modes when mode changes + +bool shouldSaveConfig = false; // For WiFiManger custom config + +struct ledstate // Data structure to store a state of a single led +{ + uint8_t red; + uint8_t green; + uint8_t blue; +}; + +typedef struct ledstate LEDState; // Define the datatype LEDState +LEDState ledstates[NUMLEDS]; // Get an array of led states to store the state of the whole strip +LEDState main_color = { 255, 0, 0 }; // Store the "main color" of the strip used in single color modes + +#define ENABLE_STATE_SAVE // If defined, save state on reboot +#ifdef ENABLE_STATE_SAVE + char current_state[32]; // Keeps the current state representation + char last_state[32]; // Save the last state as string representation + unsigned long time_statechange = 0; // Time when the state last changed + int timeout_statechange_save = 5000; // Timeout in ms to wait before state is saved + bool state_save_requested = false; // State has to be saved after timeout +#endif + +// Button handling +#ifdef ENABLE_BUTTON + #define BTN_MODE_SHORT "STA| 1| 0|245|196|255|255|255" // Static white + #define BTN_MODE_MEDIUM "STA| 1| 48|245|196|255|102| 0" // Fire flicker + #define BTN_MODE_LONG "STA| 1| 46|253|196|255|102| 0" // Fireworks random + + unsigned long keyPrevMillis = 0; + const unsigned long keySampleIntervalMs = 25; + byte longKeyPressCountMax = 80; // 80 * 25 = 2000 ms + byte mediumKeyPressCountMin = 20; // 20 * 25 = 500 ms + byte KeyPressCount = 0; + byte prevKeyState = HIGH; // button is active low + boolean buttonState = false; #endif