7539888d6d
- Bump PIO core to 2.0.4 - `#define USE_HTML_MIN_GZ` is on by default unless @toblum objects
176 lines
7.9 KiB
C
176 lines
7.9 KiB
C
//#define USE_WS2812FX_DMA // LED_PIN is ignored & set to RX/GPIO3 Uses WS2812FX, see: https://github.com/kitesurfer1404/WS2812FX
|
|
//#define USE_WS2812FX_UART1 // LED_PIN is ignored & set to D4/GPIO2 Uses WS2812FX, see: https://github.com/kitesurfer1404/WS2812FX
|
|
//#define USE_WS2812FX_UART2 // LED_PIN is ignored & set to TX/GPIO1 Uses WS2812FX, see: https://github.com/kitesurfer1404/WS2812FX
|
|
|
|
// Neopixel
|
|
#define LED_PIN 14 // LED_PIN (14 / D5) where neopixel / WS2811 strip is attached
|
|
#define NUMLEDS 24 // Number of leds in the strip
|
|
#define BUILTIN_LED 2 // ESP-12F has the built in LED on GPIO2, see https://github.com/esp8266/Arduino/issues/2192
|
|
#define BUTTON 4 // Input pin (4 / D2) for switching the LED strip on / off, connect this PIN to ground to trigger button.
|
|
|
|
#define HOSTNAME "McLighting01" // Friedly hostname
|
|
|
|
#define HTTP_OTA // If defined, enable ESP8266HTTPUpdateServer OTA code.
|
|
//#define ENABLE_OTA // If defined, enable Arduino OTA code.
|
|
#define ENABLE_AMQTT // If defined, enable Async MQTT code, see: https://github.com/marvinroger/async-mqtt-client
|
|
//#define ENABLE_MQTT // If defined, enable MQTT client code, see: https://github.com/toblum/McLighting/wiki/MQTT-API
|
|
#define ENABLE_HOMEASSISTANT // If defined, enable Homeassistant integration, ENABLE_MQTT or ENABLE_AMQTT must be active
|
|
#define ENABLE_BUTTON // If defined, enable button handling code, see: https://github.com/toblum/McLighting/wiki/Button-control
|
|
//#define MQTT_HOME_ASSISTANT_SUPPORT // If defined, use AMQTT and select Tools -> IwIP Variant -> Higher Bandwidth
|
|
#define ENABLE_LEGACY_ANIMATIONS // Dont disbale this for now
|
|
#define ENABLE_E131 // E1.31 implementation
|
|
#define USE_HTML_MIN_GZ //comment for using index.htm & edit.htm from SPIFFs instead of PROGMEM
|
|
//#define CUSTOM_WS2812FX_ANIMATIONS //uncomment and put animations in "custom_ws2812fx_animations.h"
|
|
|
|
#ifdef ENABLE_E131
|
|
#define START_UNIVERSE 1 // First DMX Universe to listen for
|
|
#define END_UNIVERSE 2 // Last Universe to listen for, starting at UNIVERSE
|
|
// MUST: END_UNIVERSE >= START_UNIVERSE
|
|
#endif
|
|
|
|
//#define WIFIMGR_PORTAL_TIMEOUT 180
|
|
//#define WIFIMGR_SET_MANUAL_IP
|
|
|
|
#ifdef WIFIMGR_SET_MANUAL_IP
|
|
uint8_t _ip[4] = {192,168,0,128};
|
|
uint8_t _gw[4] = {192,168,0,1};
|
|
uint8_t _sn[4] = {255,255,255,0};
|
|
#endif
|
|
|
|
#ifdef MQTT_HOME_ASSISTANT_SUPPORT
|
|
#define MQTT_HOME_ASSISTANT_0_87_SUPPORT // Comment if using HA version < 0.87
|
|
#endif
|
|
|
|
#if defined(USE_WS2812FX_DMA) and defined(USE_WS2812FX_UART)
|
|
#error "Cant have both DMA and UART method."
|
|
#endif
|
|
#if defined(ENABLE_MQTT) and defined(ENABLE_AMQTT)
|
|
#error "Cant have both PubSubClient and AsyncMQTT enabled. Choose either one."
|
|
#endif
|
|
#if ( (defined(ENABLE_HOMEASSISTANT) and !defined(ENABLE_MQTT)) and (defined(ENABLE_HOMEASSISTANT) and !defined(ENABLE_AMQTT)) )
|
|
#error "To use HA, you have to either enable PubCubClient or AsyncMQTT"
|
|
#endif
|
|
#if ( !defined(ENABLE_HOMEASSISTANT) and defined(MQTT_HOME_ASSISTANT_SUPPORT) )
|
|
#error "To use HA support, you have to either enable Homeassistant component"
|
|
#endif
|
|
|
|
// parameters for automatically cycling favorite patterns
|
|
uint32_t autoParams[][4] = { // color, speed, mode, duration (milliseconds)
|
|
{0xff0000, 200, 1, 5000}, // blink red for 5 seconds
|
|
{0x00ff00, 200, 3, 10000}, // wipe green for 10 seconds
|
|
{0x0000ff, 200, 14, 5000}, // dual scan blue for 5 seconds
|
|
{0x0000ff, 200, 45, 15000} // fireworks for 15 seconds
|
|
};
|
|
|
|
#if defined(ENABLE_MQTT) or defined(ENABLE_AMQTT)
|
|
|
|
const char mqtt_will_topic[] = HOSTNAME "/status";
|
|
const char mqtt_will_payload[] = "ONLINE";
|
|
const char mqtt_intopic[] = HOSTNAME "/in";
|
|
const char mqtt_outtopic[] = HOSTNAME "/out";
|
|
|
|
#ifdef ENABLE_MQTT
|
|
#define MQTT_MAX_PACKET_SIZE 512
|
|
#define MQTT_MAX_RECONNECT_TRIES 4
|
|
|
|
int mqtt_reconnect_retries = 0;
|
|
uint8_t qossub = 0; // PubSubClient can sub qos 0 or 1
|
|
#endif
|
|
|
|
#ifdef ENABLE_AMQTT
|
|
uint8_t qossub = 0; // AMQTT can sub qos 0 or 1 or 2
|
|
uint8_t qospub = 0; // AMQTT can pub qos 0 or 1 or 2
|
|
#endif
|
|
|
|
#ifdef ENABLE_HOMEASSISTANT
|
|
const char mqtt_ha_state_in[] = "home/" HOSTNAME "_ha/state/in";
|
|
const char mqtt_ha_state_out[] = "home/" HOSTNAME "_ha/state/out";
|
|
|
|
const char* on_cmd = "ON";
|
|
const char* off_cmd = "OFF";
|
|
bool stateOn = false;
|
|
bool animation_on = false;
|
|
bool new_ha_mqtt_msg = false;
|
|
uint16_t color_temp = 327; // min is 154 and max is 500
|
|
#endif
|
|
|
|
//#define ENABLE_MQTT_HOSTNAME_CHIPID // Uncomment/comment to add ESPChipID to end of MQTT hostname
|
|
#ifdef ENABLE_MQTT_HOSTNAME_CHIPID
|
|
char mqtt_clientid[64];
|
|
#else
|
|
const char mqtt_clientid[] = HOSTNAME;
|
|
#endif
|
|
|
|
char mqtt_host[64] = "";
|
|
char mqtt_port[6] = "";
|
|
char mqtt_user[32] = "";
|
|
char mqtt_pass[32] = "";
|
|
#endif
|
|
|
|
|
|
// ***************************************************************************
|
|
// Global variables / definitions
|
|
// ***************************************************************************
|
|
#define DBG_OUTPUT_PORT Serial // Set debug output port
|
|
|
|
// List of all color modes
|
|
#ifdef ENABLE_LEGACY_ANIMATIONS
|
|
#ifdef ENABLE_E131
|
|
enum MODE { SET_MODE, HOLD, OFF, SETCOLOR, SETSPEED, BRIGHTNESS, WIPE, RAINBOW, RAINBOWCYCLE, THEATERCHASE, TWINKLERANDOM, THEATERCHASERAINBOW, TV, CUSTOM, E131 };
|
|
#else
|
|
enum MODE { SET_MODE, HOLD, OFF, SETCOLOR, SETSPEED, BRIGHTNESS, WIPE, RAINBOW, RAINBOWCYCLE, THEATERCHASE, TWINKLERANDOM, THEATERCHASERAINBOW, TV, CUSTOM };
|
|
#endif
|
|
MODE mode = RAINBOW; // Standard mode that is active when software starts
|
|
bool exit_func = false; // Global helper variable to get out of the color modes when mode changes
|
|
#else
|
|
enum MODE { SET_MODE, HOLD, OFF, SETCOLOR, SETSPEED, BRIGHTNESS, CUSTOM };
|
|
MODE mode = SET_MODE; // Standard mode that is active when software starts
|
|
#endif
|
|
|
|
MODE prevmode = mode;
|
|
|
|
int ws2812fx_speed = 196; // Global variable for storing the delay between color changes --> smaller == faster
|
|
int brightness = 196; // Global variable for storing the brightness (255 == 100%)
|
|
|
|
int ws2812fx_mode = 0; // Helper variable to set WS2812FX modes
|
|
|
|
bool shouldSaveConfig = false; // For WiFiManger custom config
|
|
|
|
struct ledstate // Data structure to store a state of a single led
|
|
{
|
|
uint8_t red;
|
|
uint8_t green;
|
|
uint8_t blue;
|
|
};
|
|
|
|
typedef struct ledstate LEDState; // Define the datatype LEDState
|
|
LEDState ledstates[NUMLEDS]; // Get an array of led states to store the state of the whole strip
|
|
LEDState main_color = { 255, 0, 0 }; // Store the "main color" of the strip used in single color modes
|
|
|
|
#define ENABLE_STATE_SAVE_SPIFFS // If defined, saves state on SPIFFS
|
|
//#define ENABLE_STATE_SAVE_EEPROM // If defined, save state on reboot
|
|
#ifdef ENABLE_STATE_SAVE_EEPROM
|
|
char current_state[32]; // Keeps the current state representation
|
|
char last_state[32]; // Save the last state as string representation
|
|
unsigned long time_statechange = 0; // Time when the state last changed
|
|
int timeout_statechange_save = 5000; // Timeout in ms to wait before state is saved
|
|
bool state_save_requested = false; // State has to be saved after timeout
|
|
#endif
|
|
#ifdef ENABLE_STATE_SAVE_SPIFFS
|
|
bool updateStateFS = false;
|
|
#endif
|
|
|
|
// Button handling
|
|
#ifdef ENABLE_BUTTON
|
|
#define BTN_MODE_SHORT "STA| 1| 0|245|196|255|255|255" // Static white
|
|
#define BTN_MODE_MEDIUM "STA| 1| 48|245|196|255|102| 0" // Fire flicker
|
|
#define BTN_MODE_LONG "STA| 1| 46|253|196|255|102| 0" // Fireworks random
|
|
|
|
unsigned long keyPrevMillis = 0;
|
|
const unsigned long keySampleIntervalMs = 25;
|
|
byte longKeyPressCountMax = 80; // 80 * 25 = 2000 ms
|
|
byte mediumKeyPressCountMin = 20; // 20 * 25 = 500 ms
|
|
byte KeyPressCount = 0;
|
|
byte prevKeyState = HIGH; // button is active low
|
|
boolean buttonState = false;
|
|
#endif
|