From cfdb38eda4b4d993bac4a0e8600e776429b42b6e Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 5 Mar 2019 06:46:19 -0600 Subject: [PATCH] Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) --- Marlin/src/Marlin.cpp | 3 +- Marlin/src/core/minmax.h | 28 +- Marlin/src/core/serial.cpp | 3 +- Marlin/src/core/serial.h | 83 +++- Marlin/src/feature/I2CPositionEncoder.cpp | 58 +-- Marlin/src/feature/I2CPositionEncoder.h | 20 +- Marlin/src/feature/bedlevel/abl/abl.cpp | 21 +- Marlin/src/feature/bedlevel/ubl/ubl.cpp | 3 +- Marlin/src/feature/bedlevel/ubl/ubl.h | 14 +- Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp | 33 +- .../src/feature/bedlevel/ubl/ubl_motion.cpp | 13 +- Marlin/src/feature/dac/stepper_dac.cpp | 15 +- Marlin/src/feature/fwretract.cpp | 20 +- Marlin/src/feature/mixing.cpp | 12 +- Marlin/src/feature/mixing.h | 19 +- Marlin/src/feature/pause.cpp | 11 +- Marlin/src/feature/power_loss_recovery.cpp | 6 +- Marlin/src/feature/prusa_MMU2/mmu2.cpp | 9 +- Marlin/src/feature/twibus.cpp | 4 +- Marlin/src/gcode/bedlevel/G26.cpp | 7 +- Marlin/src/gcode/parser.cpp | 49 +-- Marlin/src/gcode/parser.h | 3 +- Marlin/src/gcode/queue.cpp | 17 +- Marlin/src/module/configuration_store.cpp | 414 +++++++++--------- Marlin/src/module/printcounter.cpp | 41 +- Marlin/src/module/probe.cpp | 37 +- Marlin/src/module/scara.cpp | 33 +- Marlin/src/module/temperature.cpp | 63 ++- Marlin/src/module/tool_change.cpp | 8 +- Marlin/src/sd/cardreader.cpp | 38 +- 30 files changed, 474 insertions(+), 611 deletions(-) diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index a848265c1..d6b6b534d 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -910,8 +910,7 @@ void setup() { #endif SERIAL_ECHO_START(); - SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory()); - SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE); + SERIAL_ECHOLNPAIR(MSG_FREE_MEMORY, freeMemory(), MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t) * (BLOCK_BUFFER_SIZE)); queue_setup(); diff --git a/Marlin/src/core/minmax.h b/Marlin/src/core/minmax.h index ddb2117db..37eccebcb 100644 --- a/Marlin/src/core/minmax.h +++ b/Marlin/src/core/minmax.h @@ -23,6 +23,10 @@ #undef MIN #undef MAX +// Pass NUM_ARGS(__VA_ARGS__) to use the number of arguments +#define _NUM_ARGS(_0,_24_,_23,_22,_21,_20,_19,_18,_17,_16,_15,_14,_13,_12,_11,_10,_9,_8,_7,_6,_5,_4,_3,_2,_1,N,...) N +#define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0) + #ifdef __cplusplus #ifndef _MINMAX_H_ @@ -46,26 +50,30 @@ #else - // NUM_ARGS(...) evaluates to the number of arguments - #define _NUM_ARGS(X,X6,X5,X4,X3,X2,X1,N,...) N - #define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,6,5,4,3,2,1,0) - - #define MIN_2(a,b) ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a < _b ? _a : _b;}) + #define MIN_2(a,b) ((a)<(b)?(a):(b)) #define MIN_3(a,...) MIN_2(a,MIN_2(__VA_ARGS__)) #define MIN_4(a,...) MIN_2(a,MIN_3(__VA_ARGS__)) #define MIN_5(a,...) MIN_2(a,MIN_4(__VA_ARGS__)) #define MIN_6(a,...) MIN_2(a,MIN_5(__VA_ARGS__)) - #define __MIN_N(N, ...) MIN_ ## N(__VA_ARGS__) - #define _MIN_N(N, ...) __MIN_N(N, __VA_ARGS__) + #define MIN_7(a,...) MIN_2(a,MIN_6(__VA_ARGS__)) + #define MIN_8(a,...) MIN_2(a,MIN_7(__VA_ARGS__)) + #define MIN_9(a,...) MIN_2(a,MIN_8(__VA_ARGS__)) + #define MIN_10(a,...) MIN_2(a,MIN_9(__VA_ARGS__)) + #define __MIN_N(N, ...) MIN_##N(__VA_ARGS__) + #define _MIN_N(N, ...) __MIN_N(N,__VA_ARGS__) #define MIN(...) _MIN_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__) - #define MAX_2(a,b) ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a > _b ? _a : _b;}) + #define MAX_2(a,b) ((a)>(b)?(a):(b)) #define MAX_3(a,...) MAX_2(a,MAX_2(__VA_ARGS__)) #define MAX_4(a,...) MAX_2(a,MAX_3(__VA_ARGS__)) #define MAX_5(a,...) MAX_2(a,MAX_4(__VA_ARGS__)) #define MAX_6(a,...) MAX_2(a,MAX_5(__VA_ARGS__)) - #define __MAX_N(N, ...) MAX_ ## N(__VA_ARGS__) - #define _MAX_N(N, ...) __MAX_N(N, __VA_ARGS__) + #define MAX_7(a,...) MAX_2(a,MAX_6(__VA_ARGS__)) + #define MAX_8(a,...) MAX_2(a,MAX_7(__VA_ARGS__)) + #define MAX_9(a,...) MAX_2(a,MAX_8(__VA_ARGS__)) + #define MAX_10(a,...) MAX_2(a,MAX_9(__VA_ARGS__)) + #define __MAX_N(N, ...) MAX_##N(__VA_ARGS__) + #define _MAX_N(N, ...) __MAX_N(N,__VA_ARGS__) #define MAX(...) _MAX_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__) #endif diff --git a/Marlin/src/core/serial.cpp b/Marlin/src/core/serial.cpp index eb39f389a..d2cbde239 100644 --- a/Marlin/src/core/serial.cpp +++ b/Marlin/src/core/serial.cpp @@ -69,8 +69,7 @@ void print_bin(const uint16_t val) { serialprintPGM(prefix); SERIAL_CHAR('('); SERIAL_ECHO(x); - SERIAL_ECHOPAIR(", ", y); - SERIAL_ECHOPAIR(", ", z); + SERIAL_ECHOPAIR(", ", y, ", ", z); SERIAL_CHAR(')'); if (suffix) serialprintPGM(suffix); else SERIAL_EOL(); } diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h index edc0cb2b6..c1d323bca 100644 --- a/Marlin/src/core/serial.h +++ b/Marlin/src/core/serial.h @@ -22,6 +22,7 @@ #pragma once #include "../inc/MarlinConfigPre.h" +#include "../core/minmax.h" #include HAL_PATH(../HAL, HAL.h) /** @@ -62,7 +63,7 @@ extern uint8_t marlin_debug_flags; #define SERIAL_CHAR(x) SERIAL_OUT(write, x) #define SERIAL_ECHO(x) SERIAL_OUT(print, x) -#define SERIAL_ECHO_F(x,y) SERIAL_OUT(print, x, y) +#define SERIAL_ECHO_F(...) SERIAL_OUT(print, __VA_ARGS__) #define SERIAL_ECHOLN(x) SERIAL_OUT(println, x) #define SERIAL_PRINT(x,b) SERIAL_OUT(print, x, b) #define SERIAL_PRINTLN(x,b) SERIAL_OUT(println, x, b) @@ -75,22 +76,78 @@ extern uint8_t marlin_debug_flags; #define SERIAL_FLUSHTX() #endif -#define SERIAL_ECHOPGM(x) (serialprintPGM(PSTR(x))) -#define SERIAL_ECHOLNPGM(x) (serialprintPGM(PSTR(x "\n"))) -#define SERIAL_ECHOPAIR(pre, value) (serial_echopair_PGM(PSTR(pre), value)) -#define SERIAL_ECHOLNPAIR(pre, value) do{ SERIAL_ECHOPAIR(pre, value); SERIAL_EOL(); }while(0) +// Print up to 12 pairs of values +#define __SEP_N(N,...) _SEP_##N(__VA_ARGS__) +#define _SEP_N(N,...) __SEP_N(N,__VA_ARGS__) +#define _SEP_2(PRE,V) serial_echopair_PGM(PSTR(PRE),V) +#define _SEP_3(a,b,ETC) do{ _SEP_2(a,b); SERIAL_ECHOPGM(ETC); }while(0) +#define _SEP_4(a,b,...) do{ _SEP_2(a,b); _SEP_2(__VA_ARGS__); }while(0) +#define _SEP_5(a,b,...) do{ _SEP_2(a,b); _SEP_3(__VA_ARGS__); }while(0) +#define _SEP_6(a,b,...) do{ _SEP_2(a,b); _SEP_4(__VA_ARGS__); }while(0) +#define _SEP_7(a,b,...) do{ _SEP_2(a,b); _SEP_5(__VA_ARGS__); }while(0) +#define _SEP_8(a,b,...) do{ _SEP_2(a,b); _SEP_6(__VA_ARGS__); }while(0) +#define _SEP_9(a,b,...) do{ _SEP_2(a,b); _SEP_7(__VA_ARGS__); }while(0) +#define _SEP_10(a,b,...) do{ _SEP_2(a,b); _SEP_8(__VA_ARGS__); }while(0) +#define _SEP_11(a,b,...) do{ _SEP_2(a,b); _SEP_9(__VA_ARGS__); }while(0) +#define _SEP_12(a,b,...) do{ _SEP_2(a,b); _SEP_10(__VA_ARGS__); }while(0) +#define _SEP_13(a,b,...) do{ _SEP_2(a,b); _SEP_11(__VA_ARGS__); }while(0) +#define _SEP_14(a,b,...) do{ _SEP_2(a,b); _SEP_12(__VA_ARGS__); }while(0) +#define _SEP_15(a,b,...) do{ _SEP_2(a,b); _SEP_13(__VA_ARGS__); }while(0) +#define _SEP_16(a,b,...) do{ _SEP_2(a,b); _SEP_14(__VA_ARGS__); }while(0) +#define _SEP_17(a,b,...) do{ _SEP_2(a,b); _SEP_15(__VA_ARGS__); }while(0) +#define _SEP_18(a,b,...) do{ _SEP_2(a,b); _SEP_16(__VA_ARGS__); }while(0) +#define _SEP_19(a,b,...) do{ _SEP_2(a,b); _SEP_17(__VA_ARGS__); }while(0) +#define _SEP_20(a,b,...) do{ _SEP_2(a,b); _SEP_18(__VA_ARGS__); }while(0) +#define _SEP_21(a,b,...) do{ _SEP_2(a,b); _SEP_19(__VA_ARGS__); }while(0) +#define _SEP_22(a,b,...) do{ _SEP_2(a,b); _SEP_20(__VA_ARGS__); }while(0) +#define _SEP_23(a,b,...) do{ _SEP_2(a,b); _SEP_21(__VA_ARGS__); }while(0) +#define _SEP_24(a,b,...) do{ _SEP_2(a,b); _SEP_22(__VA_ARGS__); }while(0) -#define SERIAL_ECHOPAIR_F(pre, value, y) do{ SERIAL_ECHO(pre); SERIAL_ECHO_F(value, y); }while(0) -#define SERIAL_ECHOLNPAIR_F(pre, value, y) do{ SERIAL_ECHOPAIR_F(pre, value, y); SERIAL_EOL(); }while(0) +#define SERIAL_ECHOPAIR(...) _SEP_N(NUM_ARGS(__VA_ARGS__),__VA_ARGS__) -#define SERIAL_ECHO_START() serial_echo_start() -#define SERIAL_ERROR_START() serial_error_start() -#define SERIAL_EOL() SERIAL_CHAR('\n') +// Print up to 12 pairs of values followed by newline +#define __SELP_N(N,...) _SELP_##N(__VA_ARGS__) +#define _SELP_N(N,...) __SELP_N(N,__VA_ARGS__) +#define _SELP_2(PRE,V) do{ serial_echopair_PGM(PSTR(PRE),V); SERIAL_EOL(); }while(0) +#define _SELP_3(PRE,V,ETC) do{ serial_echopair_PGM(PSTR(PRE),V); SERIAL_ECHOLNPGM(ETC); }while(0) +#define _SELP_4(a,b,...) do{ _SELP_2(a,b); _SELP_2(__VA_ARGS__); }while(0) +#define _SELP_5(a,b,...) do{ _SELP_2(a,b); _SELP_3(__VA_ARGS__); }while(0) +#define _SELP_6(a,b,...) do{ _SELP_2(a,b); _SELP_4(__VA_ARGS__); }while(0) +#define _SELP_7(a,b,...) do{ _SELP_2(a,b); _SELP_5(__VA_ARGS__); }while(0) +#define _SELP_8(a,b,...) do{ _SELP_2(a,b); _SELP_6(__VA_ARGS__); }while(0) +#define _SELP_9(a,b,...) do{ _SELP_2(a,b); _SELP_7(__VA_ARGS__); }while(0) +#define _SELP_10(a,b,...) do{ _SELP_2(a,b); _SELP_8(__VA_ARGS__); }while(0) +#define _SELP_11(a,b,...) do{ _SELP_2(a,b); _SELP_9(__VA_ARGS__); }while(0) +#define _SELP_12(a,b,...) do{ _SELP_2(a,b); _SELP_10(__VA_ARGS__); }while(0) +#define _SELP_13(a,b,...) do{ _SELP_2(a,b); _SELP_11(__VA_ARGS__); }while(0) +#define _SELP_14(a,b,...) do{ _SELP_2(a,b); _SELP_12(__VA_ARGS__); }while(0) +#define _SELP_15(a,b,...) do{ _SELP_2(a,b); _SELP_13(__VA_ARGS__); }while(0) +#define _SELP_16(a,b,...) do{ _SELP_2(a,b); _SELP_14(__VA_ARGS__); }while(0) +#define _SELP_17(a,b,...) do{ _SELP_2(a,b); _SELP_15(__VA_ARGS__); }while(0) +#define _SELP_18(a,b,...) do{ _SELP_2(a,b); _SELP_16(__VA_ARGS__); }while(0) +#define _SELP_19(a,b,...) do{ _SELP_2(a,b); _SELP_17(__VA_ARGS__); }while(0) +#define _SELP_20(a,b,...) do{ _SELP_2(a,b); _SELP_18(__VA_ARGS__); }while(0) +#define _SELP_21(a,b,...) do{ _SELP_2(a,b); _SELP_19(__VA_ARGS__); }while(0) +#define _SELP_22(a,b,...) do{ _SELP_2(a,b); _SELP_20(__VA_ARGS__); }while(0) +#define _SELP_23(a,b,...) do{ _SELP_2(a,b); _SELP_21(__VA_ARGS__); }while(0) +#define _SELP_24(a,b,...) do{ _SELP_2(a,b); _SELP_22(__VA_ARGS__); }while(0) -#define SERIAL_ECHO_MSG(STR) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0) -#define SERIAL_ERROR_MSG(STR) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(STR); }while(0) +#define SERIAL_ECHOLNPAIR(...) _SELP_N(NUM_ARGS(__VA_ARGS__),__VA_ARGS__) -#define SERIAL_ECHO_SP(C) serial_spaces(C) +#define SERIAL_ECHOPGM(S) (serialprintPGM(PSTR(S))) +#define SERIAL_ECHOLNPGM(S) (serialprintPGM(PSTR(S "\n"))) + +#define SERIAL_ECHOPAIR_F(pre, ...) do{ SERIAL_ECHO(pre); SERIAL_ECHO_F(__VA_ARGS__); }while(0) +#define SERIAL_ECHOLNPAIR_F(...) do{ SERIAL_ECHOPAIR_F(__VA_ARGS__); SERIAL_EOL(); }while(0) + +#define SERIAL_ECHO_START() serial_echo_start() +#define SERIAL_ERROR_START() serial_error_start() +#define SERIAL_EOL() SERIAL_CHAR('\n') + +#define SERIAL_ECHO_MSG(S) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(S); }while(0) +#define SERIAL_ERROR_MSG(S) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(S); }while(0) + +#define SERIAL_ECHO_SP(C) serial_spaces(C) // // Functions for serial printing from PROGMEM. (Saves loads of SRAM.) diff --git a/Marlin/src/feature/I2CPositionEncoder.cpp b/Marlin/src/feature/I2CPositionEncoder.cpp index f83ac8e3d..7cb915888 100644 --- a/Marlin/src/feature/I2CPositionEncoder.cpp +++ b/Marlin/src/feature/I2CPositionEncoder.cpp @@ -47,8 +47,7 @@ void I2CPositionEncoder::init(const uint8_t address, const AxisEnum axis) { initialized++; - SERIAL_ECHOPAIR("Setting up encoder on ", axis_codes[encoderAxis]); - SERIAL_ECHOLNPAIR(" axis, addr = ", address); + SERIAL_ECHOLNPAIR("Setting up encoder on ", axis_codes[encoderAxis], " axis, addr = ", address); position = get_position(); } @@ -66,8 +65,7 @@ void I2CPositionEncoder::update() { /* if (trusted) { //commented out as part of the note below trusted = false; - SERIAL_ECHOPAIR("Fault detected on ", axis_codes[encoderAxis]); - SERIAL_ECHOLNPGM(" axis encoder. Disengaging error correction until module is trusted again."); + SERIAL_ECHOLMPAIR("Fault detected on ", axis_codes[encoderAxis], " axis encoder. Disengaging error correction until module is trusted again."); } */ return; @@ -92,8 +90,7 @@ void I2CPositionEncoder::update() { if (millis() - lastErrorTime > I2CPE_TIME_TRUSTED) { trusted = true; - SERIAL_ECHOPAIR("Untrusted encoder module on ", axis_codes[encoderAxis]); - SERIAL_ECHOLNPGM(" axis has been fault-free for set duration, reinstating error correction."); + SERIAL_ECHOLNPAIR("Untrusted encoder module on ", axis_codes[encoderAxis], " axis has been fault-free for set duration, reinstating error correction."); //the encoder likely lost its place when the error occured, so we'll reset and use the printer's //idea of where it the axis is to re-initialize @@ -172,8 +169,7 @@ void I2CPositionEncoder::update() { LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i]; const int32_t errorP = int32_t(sumP * (1.0f / (I2CPE_ERR_PRST_ARRAY_SIZE))); SERIAL_ECHO(axis_codes[encoderAxis]); - SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]); - SERIAL_ECHOLNPGM("mm; correcting!"); + SERIAL_ECHOLNPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis], "mm; correcting!"); thermalManager.babystepsTodo[encoderAxis] = -LROUND(errorP); errPrstIdx = 0; } @@ -192,9 +188,7 @@ void I2CPositionEncoder::update() { if (ABS(error) > I2CPE_ERR_CNT_THRESH * planner.settings.axis_steps_per_mm[encoderAxis]) { const millis_t ms = millis(); if (ELAPSED(ms, nextErrorCountTime)) { - SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]); - SERIAL_ECHOPAIR(" axis. error: ", (int)error); - SERIAL_ECHOLNPAIR("; diffSum: ", diffSum); + SERIAL_ECHOLNPAIR("Large error on ", axis_codes[encoderAxis], " axis. error: ", (int)error, "; diffSum: ", diffSum); errorCount++; nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS; } @@ -215,8 +209,7 @@ void I2CPositionEncoder::set_homed() { #ifdef I2CPE_DEBUG SERIAL_ECHO(axis_codes[encoderAxis]); - SERIAL_ECHOPAIR(" axis encoder homed, offset of ", zeroOffset); - SERIAL_ECHOLNPGM(" ticks."); + SERIAL_ECHOLNPAIR(" axis encoder homed, offset of ", zeroOffset, " ticks."); #endif } } @@ -261,9 +254,7 @@ float I2CPositionEncoder::get_axis_error_mm(const bool report) { if (report) { SERIAL_ECHO(axis_codes[encoderAxis]); - SERIAL_ECHOPAIR(" axis target: ", target); - SERIAL_ECHOPAIR(", actual: ", actual); - SERIAL_ECHOLNPAIR(", error : ",error); + SERIAL_ECHOLNPAIR(" axis target: ", target, ", actual: ", actual, ", error : ",error); } return error; @@ -296,10 +287,7 @@ int32_t I2CPositionEncoder::get_axis_error_steps(const bool report) { if (report) { SERIAL_ECHO(axis_codes[encoderAxis]); - SERIAL_ECHOPAIR(" axis target: ", target); - SERIAL_ECHOPAIR(", actual: ", encoderCountInStepperTicksScaled); - SERIAL_ECHOLNPAIR(", error : ", error); - + SERIAL_ECHOLNPAIR(" axis target: ", target, ", actual: ", encoderCountInStepperTicksScaled, ", error : ", error); if (suppressOutput) SERIAL_ECHOLNPGM("Discontinuity detected, suppressing error."); } @@ -436,11 +424,9 @@ void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) { travelledDistance = mm_from_count(ABS(stopCount - startCount)); - SERIAL_ECHOPAIR("Attempted travel: ", travelDistance); - SERIAL_ECHOLNPGM("mm"); + SERIAL_ECHOLNPAIR("Attempted travel: ", travelDistance, "mm"); - SERIAL_ECHOPAIR(" Actual travel: ", travelledDistance); - SERIAL_ECHOLNPGM("mm"); + SERIAL_ECHOLNPAIR(" Actual travel: ", travelledDistance, "mm"); //Calculate new axis steps per unit old_steps_mm = planner.settings.axis_steps_per_mm[encoderAxis]; @@ -705,21 +691,18 @@ void I2CPositionEncodersMgr::change_module_address(const uint8_t oldaddr, const // First check 'new' address is not in use Wire.beginTransmission(I2C_ADDRESS(newaddr)); if (!Wire.endTransmission()) { - SERIAL_ECHOPAIR("?There is already a device with that address on the I2C bus! (", newaddr); - SERIAL_ECHOLNPGM(")"); + SERIAL_ECHOLNPAIR("?There is already a device with that address on the I2C bus! (", newaddr, ")"); return; } // Now check that we can find the module on the oldaddr address Wire.beginTransmission(I2C_ADDRESS(oldaddr)); if (Wire.endTransmission()) { - SERIAL_ECHOPAIR("?No module detected at this address! (", oldaddr); - SERIAL_ECHOLNPGM(")"); + SERIAL_ECHOLNPAIR("?No module detected at this address! (", oldaddr, ")"); return; } - SERIAL_ECHOPAIR("Module found at ", oldaddr); - SERIAL_ECHOLNPAIR(", changing address to ", newaddr); + SERIAL_ECHOLNPAIR("Module found at ", oldaddr, ", changing address to ", newaddr); // Change the modules address Wire.beginTransmission(I2C_ADDRESS(oldaddr)); @@ -755,13 +738,11 @@ void I2CPositionEncodersMgr::report_module_firmware(const uint8_t address) { // First check there is a module Wire.beginTransmission(I2C_ADDRESS(address)); if (Wire.endTransmission()) { - SERIAL_ECHOPAIR("?No module detected at this address! (", address); - SERIAL_ECHOLNPGM(")"); + SERIAL_ECHOLNPAIR("?No module detected at this address! (", address, ")"); return; } - SERIAL_ECHOPAIR("Requesting version info from module at address ", address); - SERIAL_ECHOLNPGM(":"); + SERIAL_ECHOLNPAIR("Requesting version info from module at address ", address, ":"); Wire.beginTransmission(I2C_ADDRESS(address)); Wire.write(I2CPE_SET_REPORT_MODE); @@ -808,15 +789,13 @@ int8_t I2CPositionEncodersMgr::parse() { else if (parser.seenval('I')) { if (!parser.has_value()) { - SERIAL_ECHOLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1); - SERIAL_ECHOLNPGM("]"); + SERIAL_ECHOLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1, "]"); return I2CPE_PARSE_ERR; }; I2CPE_idx = parser.value_byte(); if (I2CPE_idx >= I2CPE_ENCODER_CNT) { - SERIAL_ECHOLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1); - SERIAL_ECHOLNPGM("]"); + SERIAL_ECHOLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1, "]"); return I2CPE_PARSE_ERR; } @@ -995,8 +974,7 @@ void I2CPositionEncodersMgr::M864() { else return; } - SERIAL_ECHOPAIR("Changing module at address ", I2CPE_addr); - SERIAL_ECHOLNPAIR(" to address ", newAddress); + SERIAL_ECHOLNPAIR("Changing module at address ", I2CPE_addr, " to address ", newAddress); change_module_address(I2CPE_addr, newAddress); } diff --git a/Marlin/src/feature/I2CPositionEncoder.h b/Marlin/src/feature/I2CPositionEncoder.h index 6be24f681..b88ca88cb 100644 --- a/Marlin/src/feature/I2CPositionEncoder.h +++ b/Marlin/src/feature/I2CPositionEncoder.h @@ -238,8 +238,7 @@ class I2CPositionEncodersMgr { static void report_status(const int8_t idx) { CHECK_IDX(); - SERIAL_ECHOPAIR("Encoder ", idx); - SERIAL_ECHOPGM(": "); + SERIAL_ECHOLNPAIR("Encoder ", idx, ": "); encoders[idx].get_raw_count(); encoders[idx].passes_test(true); } @@ -264,22 +263,19 @@ class I2CPositionEncodersMgr { static void report_error_count(const int8_t idx, const AxisEnum axis) { CHECK_IDX(); - SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]); - SERIAL_ECHOLNPAIR(" axis is ", encoders[idx].get_error_count()); + SERIAL_ECHOLNPAIR("Error count on ", axis_codes[axis], " axis is ", encoders[idx].get_error_count()); } static void reset_error_count(const int8_t idx, const AxisEnum axis) { CHECK_IDX(); encoders[idx].set_error_count(0); - SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]); - SERIAL_ECHOLNPGM(" axis has been reset."); + SERIAL_ECHOLNPAIR("Error count on ", axis_codes[axis], " axis has been reset."); } static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) { CHECK_IDX(); encoders[idx].set_ec_enabled(enabled); - SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis]); - SERIAL_ECHOPGM(" axis is "); + SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis], " axis is "); serialprintPGM(encoders[idx].get_ec_enabled() ? PSTR("en") : PSTR("dis")); SERIAL_ECHOLNPGM("abled."); } @@ -287,17 +283,13 @@ class I2CPositionEncodersMgr { static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) { CHECK_IDX(); encoders[idx].set_ec_threshold(newThreshold); - SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]); - SERIAL_ECHOPAIR(" axis set to ", FIXFLOAT(newThreshold)); - SERIAL_ECHOLNPGM("mm."); + SERIAL_ECHOLNPAIR("Error correct threshold for ", axis_codes[axis], " axis set to ", FIXFLOAT(newThreshold), "mm."); } static void get_ec_threshold(const int8_t idx, const AxisEnum axis) { CHECK_IDX(); const float threshold = encoders[idx].get_ec_threshold(); - SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]); - SERIAL_ECHOPAIR(" axis is ", FIXFLOAT(threshold)); - SERIAL_ECHOLNPGM("mm."); + SERIAL_ECHOLNPAIR("Error correct threshold for ", axis_codes[axis], " axis is ", FIXFLOAT(threshold), "mm."); } static int8_t idx_from_axis(const AxisEnum axis) { diff --git a/Marlin/src/feature/bedlevel/abl/abl.cpp b/Marlin/src/feature/bedlevel/abl/abl.cpp index ba4d5cfac..c59c562a8 100644 --- a/Marlin/src/feature/bedlevel/abl/abl.cpp +++ b/Marlin/src/feature/bedlevel/abl/abl.cpp @@ -338,22 +338,11 @@ float bilinear_z_offset(const float raw[XYZ]) { /* static float last_offset = 0; if (ABS(last_offset - offset) > 0.2) { - SERIAL_ECHOPGM("Sudden Shift at "); - SERIAL_ECHOPAIR("x=", rx); - SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[X_AXIS]); - SERIAL_ECHOLNPAIR(" -> gridx=", gridx); - SERIAL_ECHOPAIR(" y=", ry); - SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[Y_AXIS]); - SERIAL_ECHOLNPAIR(" -> gridy=", gridy); - SERIAL_ECHOPAIR(" ratio_x=", ratio_x); - SERIAL_ECHOLNPAIR(" ratio_y=", ratio_y); - SERIAL_ECHOPAIR(" z1=", z1); - SERIAL_ECHOPAIR(" z2=", z2); - SERIAL_ECHOPAIR(" z3=", z3); - SERIAL_ECHOLNPAIR(" z4=", z4); - SERIAL_ECHOPAIR(" L=", L); - SERIAL_ECHOPAIR(" R=", R); - SERIAL_ECHOLNPAIR(" offset=", offset); + SERIAL_ECHOLNPAIR("Sudden Shift at x=", rx, " / ", bilinear_grid_spacing[X_AXIS], " -> gridx=", gridx); + SERIAL_ECHOLNPAIR(" y=", ry, " / ", bilinear_grid_spacing[Y_AXIS], " -> gridy=", gridy); + SERIAL_ECHOLNPAIR(" ratio_x=", ratio_x, " ratio_y=", ratio_y); + SERIAL_ECHOLNPAIR(" z1=", z1, " z2=", z2, " z3=", z3, " z4=", z4); + SERIAL_ECHOLNPAIR(" L=", L, " R=", R, " offset=", offset); } last_offset = offset; //*/ diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.cpp b/Marlin/src/feature/bedlevel/ubl/ubl.cpp index 349377c0c..1945f99da 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl.cpp @@ -45,8 +45,7 @@ for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) if (!isnan(z_values[x][y])) { SERIAL_ECHO_START(); - SERIAL_ECHOPAIR(" M421 I", x); - SERIAL_ECHOPAIR(" J", y); + SERIAL_ECHOPAIR(" M421 I", x, " J", y); SERIAL_ECHOPAIR_F(" Z", z_values[x][y], 2); SERIAL_EOL(); serial_delay(75); // Prevent Printrun from exploding diff --git a/Marlin/src/feature/bedlevel/ubl/ubl.h b/Marlin/src/feature/bedlevel/ubl/ubl.h index c647f632a..face56182 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl.h +++ b/Marlin/src/feature/bedlevel/ubl/ubl.h @@ -202,11 +202,7 @@ class unified_bed_leveling { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { serialprintPGM( !WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) ? PSTR("x1_i") : PSTR("yi") ); - SERIAL_ECHOPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0); - SERIAL_ECHOPAIR(",x1_i=", x1_i); - SERIAL_ECHOPAIR(",yi=", yi); - SERIAL_CHAR(')'); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0, ",x1_i=", x1_i, ",yi=", yi, ")"); } #endif @@ -235,12 +231,8 @@ class unified_bed_leveling { if (!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) || !WITHIN(y1_i, 0, GRID_MAX_POINTS_Y - 1)) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { - serialprintPGM( !WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) ? PSTR("xi") : PSTR("y1_i") ); - SERIAL_ECHOPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0); - SERIAL_ECHOPAIR(", xi=", xi); - SERIAL_ECHOPAIR(", y1_i=", y1_i); - SERIAL_CHAR(')'); - SERIAL_EOL(); + serialprintPGM(!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) ? PSTR("xi") : PSTR("y1_i")); + SERIAL_ECHOLNPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0, ", xi=", xi, ", y1_i=", y1_i, ")"); } #endif diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index 637f9bda4..42659c920 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -598,8 +598,7 @@ } if (!WITHIN(g29_storage_slot, 0, a - 1)) { - SERIAL_ECHOLNPGM("?Invalid storage slot."); - SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1); + SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1); return; } @@ -627,8 +626,7 @@ } if (!WITHIN(g29_storage_slot, 0, a - 1)) { - SERIAL_ECHOLNPGM("?Invalid storage slot."); - SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1); + SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1); goto LEAVE; } @@ -1640,10 +1638,8 @@ if (storage_slot == -1) SERIAL_ECHOPGM("No Mesh Loaded."); - else { - SERIAL_ECHOPAIR("Mesh ", storage_slot); - SERIAL_ECHOPGM(" Loaded."); - } + else + SERIAL_ECHOPAIR("Mesh ", storage_slot, " Loaded."); SERIAL_EOL(); serial_delay(50); @@ -1683,19 +1679,16 @@ SERIAL_EOL(); #if HAS_KILL - SERIAL_ECHOPAIR("Kill pin on :", KILL_PIN); - SERIAL_ECHOLNPAIR(" state:", READ(KILL_PIN)); + SERIAL_ECHOLNPAIR("Kill pin on :", int(KILL_PIN), " state:", READ(KILL_PIN)); #endif SERIAL_EOL(); serial_delay(50); #if ENABLED(UBL_DEVEL_DEBUGGING) - SERIAL_ECHOLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation); SERIAL_EOL(); - SERIAL_ECHOLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk); SERIAL_EOL(); + SERIAL_ECHOLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation, "\nubl_state_recursion_chk :", ubl_state_recursion_chk); serial_delay(50); - SERIAL_ECHOPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index())); - SERIAL_ECHOLNPAIR(" to ", hex_address((void*)settings.meshes_end_index())); + SERIAL_ECHOLNPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index()), " to ", hex_address((void*)settings.meshes_end_index())); serial_delay(50); SERIAL_ECHOLNPAIR("sizeof(ubl) : ", (int)sizeof(ubl)); SERIAL_EOL(); @@ -1705,8 +1698,7 @@ SERIAL_ECHOLNPAIR("EEPROM free for UBL: ", hex_address((void*)(settings.meshes_end_index() - settings.meshes_start_index()))); serial_delay(50); - SERIAL_ECHOPAIR("EEPROM can hold ", settings.calc_num_meshes()); - SERIAL_ECHOLNPGM(" meshes.\n"); + SERIAL_ECHOLNPAIR("EEPROM can hold ", settings.calc_num_meshes(), " meshes.\n"); serial_delay(25); #endif // UBL_DEVEL_DEBUGGING @@ -1753,24 +1745,21 @@ } if (!parser.has_value()) { - SERIAL_ECHOLNPGM("?Storage slot # required."); - SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1); + SERIAL_ECHOLNPAIR("?Storage slot # required.\n?Use 0 to ", a - 1); return; } g29_storage_slot = parser.value_int(); if (!WITHIN(g29_storage_slot, 0, a - 1)) { - SERIAL_ECHOLNPGM("?Invalid storage slot."); - SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1); + SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1); return; } float tmp_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; settings.load_mesh(g29_storage_slot, &tmp_z_values); - SERIAL_ECHOPAIR("Subtracting mesh in slot ", g29_storage_slot); - SERIAL_ECHOLNPGM(" from current mesh."); + SERIAL_ECHOLNPAIR("Subtracting mesh in slot ", g29_storage_slot, " from current mesh."); for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp index 01773972a..4034531a0 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp @@ -65,12 +65,13 @@ cell_dest_yi = get_cell_index_y(end[Y_AXIS]); if (g26_debug_flag) { - SERIAL_ECHOPAIR(" ubl.line_to_destination_cartesian(xe=", destination[X_AXIS]); - SERIAL_ECHOPAIR(", ye=", destination[Y_AXIS]); - SERIAL_ECHOPAIR(", ze=", destination[Z_AXIS]); - SERIAL_ECHOPAIR(", ee=", destination[E_AXIS]); - SERIAL_CHAR(')'); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " ubl.line_to_destination_cartesian(xe=", destination[X_AXIS], + ", ye=", destination[Y_AXIS], + ", ze=", destination[Z_AXIS], + ", ee=", destination[E_AXIS], + ")" + ); debug_current_and_destination(PSTR("Start of ubl.line_to_destination_cartesian()")); } diff --git a/Marlin/src/feature/dac/stepper_dac.cpp b/Marlin/src/feature/dac/stepper_dac.cpp index 3e10592b4..821fcab1a 100644 --- a/Marlin/src/feature/dac/stepper_dac.cpp +++ b/Marlin/src/feature/dac/stepper_dac.cpp @@ -105,15 +105,12 @@ void dac_print_values() { SERIAL_ECHO_MSG("Stepper current values in % (Amps):"); SERIAL_ECHO_START(); - SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS)); - SERIAL_ECHOPAIR(" (", dac_amps(X_AXIS)); - SERIAL_ECHOPAIR(") Y:", dac_perc(Y_AXIS)); - SERIAL_ECHOPAIR(" (", dac_amps(Y_AXIS)); - SERIAL_ECHOPAIR(") Z:", dac_perc(Z_AXIS)); - SERIAL_ECHOPAIR(" (", dac_amps(Z_AXIS)); - SERIAL_ECHOPAIR(") E:", dac_perc(E_AXIS)); - SERIAL_ECHOPAIR(" (", dac_amps(E_AXIS)); - SERIAL_ECHOLNPGM(")"); + SERIAL_ECHOLNPAIR( + " X:", dac_perc(X_AXIS), " (", dac_amps(X_AXIS), ")" + " Y:", dac_perc(Y_AXIS), " (", dac_amps(Y_AXIS), ")" + " Z:", dac_perc(Z_AXIS), " (", dac_amps(Z_AXIS), ")" + " E:", dac_perc(E_AXIS), " (", dac_amps(E_AXIS), ")" + ); } void dac_commit_eeprom() { diff --git a/Marlin/src/feature/fwretract.cpp b/Marlin/src/feature/fwretract.cpp index 582614bb9..dc044687b 100644 --- a/Marlin/src/feature/fwretract.cpp +++ b/Marlin/src/feature/fwretract.cpp @@ -112,15 +112,15 @@ void FWRetract::retract(const bool retracting #endif /* // debugging - SERIAL_ECHOLNPAIR("retracting ", retracting); - SERIAL_ECHOLNPAIR("swapping ", swapping); - SERIAL_ECHOLNPAIR("active extruder ", active_extruder); + SERIAL_ECHOLNPAIR( + "retracting ", retracting, + "swapping ", swapping + "active extruder ", active_extruder + ); for (uint8_t i = 0; i < EXTRUDERS; ++i) { - SERIAL_ECHOPAIR("retracted[", i); - SERIAL_ECHOLNPAIR("] ", retracted[i]); + SERIAL_ECHOLNPAIR("retracted[", i, "] ", retracted[i]); #if EXTRUDERS > 1 - SERIAL_ECHOPAIR("retracted_swap[", i); - SERIAL_ECHOLNPAIR("] ", retracted_swap[i]); + SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", retracted_swap[i]); #endif } SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]); @@ -209,11 +209,9 @@ void FWRetract::retract(const bool retracting SERIAL_ECHOLNPAIR("swapping ", swapping); SERIAL_ECHOLNPAIR("active_extruder ", active_extruder); for (uint8_t i = 0; i < EXTRUDERS; ++i) { - SERIAL_ECHOPAIR("retracted[", i); - SERIAL_ECHOLNPAIR("] ", retracted[i]); + SERIAL_ECHOLNPAIR("retracted[", i, "] ", retracted[i]); #if EXTRUDERS > 1 - SERIAL_ECHOPAIR("retracted_swap[", i); - SERIAL_ECHOLNPAIR("] ", retracted_swap[i]); + SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", retracted_swap[i]); #endif } SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]); diff --git a/Marlin/src/feature/mixing.cpp b/Marlin/src/feature/mixing.cpp index dd1f886eb..98b26e29c 100644 --- a/Marlin/src/feature/mixing.cpp +++ b/Marlin/src/feature/mixing.cpp @@ -139,19 +139,11 @@ void Mixer::refresh_collector(const float proportion/*=1.0*/, const uint8_t t/*= cmax = MAX(cmax, v); csum += v; } - //SERIAL_ECHOPAIR("Mixer::refresh_collector(", proportion); - //SERIAL_ECHOPAIR(", ", int(t)); - //SERIAL_ECHOPAIR(") cmax=", cmax); - //SERIAL_ECHOPAIR(" csum=", csum); - //SERIAL_ECHOPGM(" color"); + //SERIAL_ECHOPAIR("Mixer::refresh_collector(", proportion, ", ", int(t), ") cmax=", cmax, " csum=", csum, " color"); const float inv_prop = proportion / csum; MIXER_STEPPER_LOOP(i) { collector[i] = color[t][i] * inv_prop; - //SERIAL_ECHOPAIR(" [", int(t)); - //SERIAL_ECHOPAIR("][", int(i)); - //SERIAL_ECHOPAIR("] = ", int(color[t][i])); - //SERIAL_ECHOPAIR(" (", collector[i]); - //SERIAL_ECHOPGM(") "); + //SERIAL_ECHOPAIR(" [", int(t), "][", int(i), "] = ", int(color[t][i]), " (", collector[i], ") "); } //SERIAL_EOL(); } diff --git a/Marlin/src/feature/mixing.h b/Marlin/src/feature/mixing.h index 718b40d02..9003566eb 100644 --- a/Marlin/src/feature/mixing.h +++ b/Marlin/src/feature/mixing.h @@ -148,11 +148,7 @@ class Mixer { MIXER_STEPPER_LOOP(i) tcolor[i] = mix[i] * scale; #ifdef MIXER_NORMALIZER_DEBUG - SERIAL_ECHOPAIR("Mix [", int(mix[0])); - SERIAL_ECHOPAIR(", ", int(mix[1])); - SERIAL_ECHOPAIR("] to Color [", int(tcolor[0])); - SERIAL_ECHOPAIR(", ", int(tcolor[1])); - SERIAL_ECHOLNPGM("]"); + SERIAL_ECHOLNPAIR("Mix [", int(mix[0]), ", ", int(mix[1]), "] to Color [", int(tcolor[0]), ", ", int(tcolor[1]), "]"); #endif } @@ -163,12 +159,7 @@ class Mixer { mix[0] = mixer_perc_t(100.0f * color[j][0] / ctot); mix[1] = 100 - mix[0]; #ifdef MIXER_NORMALIZER_DEBUG - SERIAL_ECHOPAIR("V-tool ", int(j)); - SERIAL_ECHOPAIR(" [", int(color[j][0])); - SERIAL_ECHOPAIR(", ", int(color[j][1])); - SERIAL_ECHOPAIR("] to Mix [", int(mix[0])); - SERIAL_ECHOPAIR(", ", int(mix[1])); - SERIAL_ECHOLNPGM("]"); + SERIAL_ECHOLNPAIR("V-tool ", int(j), " [", int(color[j][0]), ", ", int(color[j][1]), "] to Mix [", int(mix[0]), ", ", int(mix[1]), "]"); #endif } @@ -211,11 +202,7 @@ class Mixer { mix[0] = (mixer_perc_t)CEIL(100.0f * gradient.color[0] / ctot); mix[1] = 100 - mix[0]; #ifdef MIXER_NORMALIZER_DEBUG - SERIAL_ECHOPAIR("Gradient [", int(gradient.color[0])); - SERIAL_ECHOPAIR(", ", int(gradient.color[1])); - SERIAL_ECHOPAIR("] to Mix [", int(mix[0])); - SERIAL_ECHOPAIR(", ", int(mix[1])); - SERIAL_ECHOLNPGM("]"); + SERIAL_ECHOLNPAIR("Gradient [", int(gradient.color[0]), ", ", int(gradient.color[1]), "] to Mix [", int(mix[0]), ", ", int(mix[1]), "]"); #endif } diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp index 1a61fe90e..bffac7acd 100644 --- a/Marlin/src/feature/pause.cpp +++ b/Marlin/src/feature/pause.cpp @@ -581,11 +581,12 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep */ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) { /* - SERIAL_ECHOLNPGM("start of resume_print()"); - SERIAL_ECHOPAIR("\ndual_x_carriage_mode:", dual_x_carriage_mode); - SERIAL_ECHOPAIR("\nextruder_duplication_enabled:", extruder_duplication_enabled); - SERIAL_ECHOPAIR("\nactive_extruder:", active_extruder); - SERIAL_ECHOLNPGM("\n"); + SERIAL_ECHOLNPAIR( + "start of resume_print()\ndual_x_carriage_mode:", dual_x_carriage_mode, + "\nextruder_duplication_enabled:", extruder_duplication_enabled, + "\nactive_extruder:", active_extruder, + "\n" + ); //*/ if (!did_pause_print) return; diff --git a/Marlin/src/feature/power_loss_recovery.cpp b/Marlin/src/feature/power_loss_recovery.cpp index 7b8f15b65..913d3bc68 100644 --- a/Marlin/src/feature/power_loss_recovery.cpp +++ b/Marlin/src/feature/power_loss_recovery.cpp @@ -357,8 +357,7 @@ void PrintJobRecovery::resume() { void PrintJobRecovery::debug(PGM_P const prefix) { serialprintPGM(prefix); - SERIAL_ECHOPAIR(" Job Recovery Info...\nvalid_head:", int(info.valid_head)); - SERIAL_ECHOLNPAIR(" valid_foot:", int(info.valid_foot)); + SERIAL_ECHOLNPAIR(" Job Recovery Info...\nvalid_head:", int(info.valid_head), " valid_foot:", int(info.valid_foot)); if (info.valid_head) { if (info.valid_head == info.valid_foot) { SERIAL_ECHOPGM("current_position: "); @@ -394,8 +393,7 @@ void PrintJobRecovery::resume() { #endif #if HAS_LEVELING - SERIAL_ECHOPAIR("leveling: ", int(info.leveling)); - SERIAL_ECHOLNPAIR(" fade: ", int(info.fade)); + SERIAL_ECHOLNPAIR("leveling: ", int(info.leveling), "\n fade: ", int(info.fade)); #endif #if ENABLED(FWRETRACT) SERIAL_ECHOPGM("retract: "); diff --git a/Marlin/src/feature/prusa_MMU2/mmu2.cpp b/Marlin/src/feature/prusa_MMU2/mmu2.cpp index 92179774d..1c733dd78 100644 --- a/Marlin/src/feature/prusa_MMU2/mmu2.cpp +++ b/Marlin/src/feature/prusa_MMU2/mmu2.cpp @@ -174,8 +174,7 @@ void MMU2::mmuLoop() { sscanf(rx_buffer, "%uok\n", &version); #if ENABLED(MMU2_DEBUG) - SERIAL_ECHOLNPAIR("MMU => ", version); - SERIAL_ECHOLNPGM("MMU <= 'S2'"); + SERIAL_ECHOLNPAIR("MMU => ", version, "\nMMU <= 'S2'"); #endif tx_str_P(PSTR("S2\n")); // read build number @@ -234,8 +233,7 @@ void MMU2::mmuLoop() { sscanf(rx_buffer, "%hhuok\n", &finda); #if ENABLED(MMU2_DEBUG) - SERIAL_ECHOLNPAIR("MMU => ", finda); - SERIAL_ECHOLNPGM("MMU - ENABLED"); + SERIAL_ECHOLNPAIR("MMU => ", finda, "\nMMU - ENABLED"); #endif enabled = true; @@ -309,8 +307,7 @@ void MMU2::mmuLoop() { // filament type int filament = cmd - MMU_CMD_F0; #if ENABLED(MMU2_DEBUG) - SERIAL_ECHOPAIR("MMU <= F", filament); - SERIAL_ECHOPGM(" "); + SERIAL_ECHOPAIR("MMU <= F", filament, " "); SERIAL_ECHO_F(cmd_arg, DEC); SERIAL_ECHOPGM("\n"); #endif diff --git a/Marlin/src/feature/twibus.cpp b/Marlin/src/feature/twibus.cpp index 6913284d3..826b71416 100644 --- a/Marlin/src/feature/twibus.cpp +++ b/Marlin/src/feature/twibus.cpp @@ -92,9 +92,7 @@ void TWIBus::send() { void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) { SERIAL_ECHO_START(); serialprintPGM(prefix); - SERIAL_ECHOPAIR(": from:", adr); - SERIAL_ECHOPAIR(" bytes:", bytes); - SERIAL_ECHOPGM(" data:"); + SERIAL_ECHOPAIR(": from:", adr, " bytes:", bytes, " data:"); } // static diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp index cb7622900..1b1b09dd1 100644 --- a/Marlin/src/gcode/bedlevel/G26.cpp +++ b/Marlin/src/gcode/bedlevel/G26.cpp @@ -346,12 +346,7 @@ inline bool look_for_lines_to_connect() { if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) { if (g26_debug_flag) { - SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx); - SERIAL_ECHOPAIR(", sy=", sy); - SERIAL_ECHOPAIR(") -> (ex=", ex); - SERIAL_ECHOPAIR(", ey=", ey); - SERIAL_CHAR(')'); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" Connecting with horizontal line (sx=", sx, ", sy=", sy, ") -> (ex=", ex, ", ey=", ey, ")"); //debug_current_and_destination(PSTR("Connecting horizontal line.")); } print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height); diff --git a/Marlin/src/gcode/parser.cpp b/Marlin/src/gcode/parser.cpp index 984af5416..8d4c16795 100644 --- a/Marlin/src/gcode/parser.cpp +++ b/Marlin/src/gcode/parser.cpp @@ -272,8 +272,7 @@ void GCodeParser::parse(char *p) { #if ENABLED(DEBUG_GCODE_PARSER) if (debug) { - SERIAL_ECHOPAIR("Got letter ", code); - SERIAL_ECHOPAIR(" at index ", (int)(p - command_ptr - 1)); + SERIAL_ECHOPAIR("Got letter ", code, " at index ", (int)(p - command_ptr - 1)); if (has_num) SERIAL_ECHOPGM(" (has_num)"); } #endif @@ -329,47 +328,41 @@ void GCodeParser::parse(char *p) { void GCodeParser::unknown_command_error() { SERIAL_ECHO_START(); - SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, command_ptr); - SERIAL_CHAR('"'); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(MSG_UNKNOWN_COMMAND, command_ptr, "\""); } #if ENABLED(DEBUG_GCODE_PARSER) void GCodeParser::debug() { - SERIAL_ECHOPAIR("Command: ", command_ptr); - SERIAL_ECHOPAIR(" (", command_letter); + SERIAL_ECHOPAIR("Command: ", command_ptr, " (", command_letter); SERIAL_ECHO(codenum); SERIAL_ECHOLNPGM(")"); #if ENABLED(FASTER_GCODE_PARSER) - SERIAL_ECHOPGM(" args: \""); - for (char c = 'A'; c <= 'Z'; ++c) - if (seen(c)) { SERIAL_CHAR(c); SERIAL_CHAR(' '); } + SERIAL_ECHOPGM(" args: { "); + for (char c = 'A'; c <= 'Z'; ++c) if (seen(c)) { SERIAL_CHAR(c); SERIAL_CHAR(' '); } + SERIAL_CHAR('}'); #else - SERIAL_ECHOPAIR(" args: \"", command_args); + SERIAL_ECHOPAIR(" args: { ", command_args, " }"); #endif - SERIAL_CHAR('"'); - if (string_arg) { - SERIAL_ECHOPGM(" string: \""); - SERIAL_ECHO(string_arg); - SERIAL_CHAR('"'); - } + if (string_arg) SERIAL_ECHOPAIR(" string: \"", string_arg, "\""); SERIAL_ECHOLNPGM("\n"); for (char c = 'A'; c <= 'Z'; ++c) { if (seen(c)) { SERIAL_ECHOPAIR("Code '", c); SERIAL_ECHOPGM("':"); if (has_value()) { - SERIAL_ECHOPAIR("\n float: ", value_float()); - SERIAL_ECHOPAIR("\n long: ", value_long()); - SERIAL_ECHOPAIR("\n ulong: ", value_ulong()); - SERIAL_ECHOPAIR("\n millis: ", value_millis()); - SERIAL_ECHOPAIR("\n sec-ms: ", value_millis_from_seconds()); - SERIAL_ECHOPAIR("\n int: ", value_int()); - SERIAL_ECHOPAIR("\n ushort: ", value_ushort()); - SERIAL_ECHOPAIR("\n byte: ", (int)value_byte()); - SERIAL_ECHOPAIR("\n bool: ", (int)value_bool()); - SERIAL_ECHOPAIR("\n linear: ", value_linear_units()); - SERIAL_ECHOPAIR("\n celsius: ", value_celsius()); + SERIAL_ECHOPAIR( + "\n float: ", value_float(), + "\n long: ", value_long(), + "\n ulong: ", value_ulong(), + "\n millis: ", value_millis(), + "\n sec-ms: ", value_millis_from_seconds(), + "\n int: ", value_int(), + "\n ushort: ", value_ushort(), + "\n byte: ", (int)value_byte(), + "\n bool: ", (int)value_bool(), + "\n linear: ", value_linear_units(), + "\n celsius: ", value_celsius() + ); } else SERIAL_ECHOPGM(" (no value)"); diff --git a/Marlin/src/gcode/parser.h b/Marlin/src/gcode/parser.h index 73adfafcc..c5a473df6 100644 --- a/Marlin/src/gcode/parser.h +++ b/Marlin/src/gcode/parser.h @@ -120,8 +120,7 @@ public: param[ind] = ptr ? ptr - command_ptr : 0; // parameter offset or 0 #if ENABLED(DEBUG_GCODE_PARSER) if (codenum == 800) { - SERIAL_ECHOPAIR("Set bit ", (int)ind); - SERIAL_ECHOPAIR(" of codebits (", hex_address((void*)(codebits >> 16))); + SERIAL_ECHOPAIR("Set bit ", (int)ind, " of codebits (", hex_address((void*)(codebits >> 16))); print_hex_word((uint16_t)(codebits & 0xFFFF)); SERIAL_ECHOLNPAIR(") | param = ", (int)param[ind]); } diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp index 161c3a4d0..515502bdc 100644 --- a/Marlin/src/gcode/queue.cpp +++ b/Marlin/src/gcode/queue.cpp @@ -150,9 +150,7 @@ bool enqueue_and_echo_command(const char* cmd) { if (_enqueuecommand(cmd)) { SERIAL_ECHO_START(); - SERIAL_ECHOPAIR(MSG_ENQUEUEING, cmd); - SERIAL_CHAR('"'); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(MSG_ENQUEUEING, cmd, "\""); return true; } return false; @@ -398,9 +396,10 @@ void gcode_line_error(PGM_P const err, const int8_t port) { stream_state = StreamState::PACKET_RESET; bytes_received = 0; time_stream_start = millis(); - SERIAL_ECHOPAIR("echo: Datastream initialized (", stream_header.filesize); - SERIAL_ECHOLNPGM(" bytes expected)"); - SERIAL_ECHOLNPAIR("so", buffer_size); // confirm active stream and the maximum block size supported + // confirm active stream and the maximum block size supported + SERIAL_ECHO_START(); + SERIAL_ECHOLNPAIR("Datastream initialized (", stream_header.filesize, " bytes expected)"); + SERIAL_ECHOLNPAIR("so", buffer_size); } else { SERIAL_ECHO_MSG("Datastream init error (invalid token)"); @@ -468,8 +467,7 @@ void gcode_line_error(PGM_P const err, const int8_t port) { } else { SERIAL_ECHO_START(); - SERIAL_ECHOPAIR("Block(", packet.header.id); - SERIAL_ECHOLNPGM(") Corrupt"); + SERIAL_ECHOLNPAIR("Block(", packet.header.id, ") Corrupt"); stream_state = StreamState::PACKET_FLUSHRX; } break; @@ -504,8 +502,7 @@ void gcode_line_error(PGM_P const err, const int8_t port) { card.flag.binary_mode = false; SERIAL_ECHO_START(); SERIAL_ECHO(card.filename); - SERIAL_ECHOPAIR(" transfer completed @ ", ((bytes_received / (millis() - time_stream_start) * 1000) / 1024)); - SERIAL_ECHOLNPGM("KiB/s"); + SERIAL_ECHOLNPAIR(" transfer completed @ ", ((bytes_received / (millis() - time_stream_start) * 1000) / 1024), "KiB/s"); SERIAL_ECHOLNPGM("sc"); // transmit stream complete token card.closefile(); return; diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index 47f87281e..1074dd914 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -382,8 +382,8 @@ void MarlinSettings::postprocess() { #if ENABLED(EEPROM_CHITCHAT) #define CHITCHAT_ECHO(V) SERIAL_ECHO(V) #define CHITCHAT_ECHOLNPGM(STR) SERIAL_ECHOLNPGM(STR) - #define CHITCHAT_ECHOPAIR(STR,V) SERIAL_ECHOPAIR(STR,V) - #define CHITCHAT_ECHOLNPAIR(STR,V) SERIAL_ECHOLNPAIR(STR,V) + #define CHITCHAT_ECHOPAIR(...) SERIAL_ECHOPAIR(__VA_ARGS__) + #define CHITCHAT_ECHOLNPAIR(...) SERIAL_ECHOLNPAIR(__VA_ARGS__) #define CHITCHAT_ECHO_START() SERIAL_ECHO_START() #define CHITCHAT_ERROR_START() SERIAL_ERROR_START() #define CHITCHAT_ERROR_MSG(STR) SERIAL_ERROR_MSG(STR) @@ -392,8 +392,8 @@ void MarlinSettings::postprocess() { #else #define CHITCHAT_ECHO(V) NOOP #define CHITCHAT_ECHOLNPGM(STR) NOOP - #define CHITCHAT_ECHOPAIR(STR,V) NOOP - #define CHITCHAT_ECHOLNPAIR(STR,V) NOOP + #define CHITCHAT_ECHOPAIR(...) NOOP + #define CHITCHAT_ECHOLNPAIR(...) NOOP #define CHITCHAT_ECHO_START() NOOP #define CHITCHAT_ERROR_START() NOOP #define CHITCHAT_ERROR_MSG(STR) NOOP @@ -1104,9 +1104,7 @@ void MarlinSettings::postprocess() { // Report storage size CHITCHAT_ECHO_START(); - CHITCHAT_ECHOPAIR("Settings Stored (", eeprom_size); - CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)final_crc); - CHITCHAT_ECHOLNPGM(")"); + CHITCHAT_ECHOLNPAIR("Settings Stored (", eeprom_size, " bytes; crc ", (uint32_t)final_crc, ")"); eeprom_error |= size_error(eeprom_size); } @@ -1144,9 +1142,7 @@ void MarlinSettings::postprocess() { stored_ver[1] = '\0'; } CHITCHAT_ECHO_START(); - CHITCHAT_ECHOPGM("EEPROM version mismatch "); - CHITCHAT_ECHOPAIR("(EEPROM=", stored_ver); - CHITCHAT_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")"); + CHITCHAT_ECHOLNPAIR("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")"); eeprom_error = true; } else { @@ -1812,24 +1808,17 @@ void MarlinSettings::postprocess() { eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET)); if (eeprom_error) { CHITCHAT_ECHO_START(); - CHITCHAT_ECHOPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET))); - CHITCHAT_ECHOLNPAIR(" Size: ", datasize()); + CHITCHAT_ECHOLNPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)), " Size: ", datasize()); } else if (working_crc != stored_crc) { eeprom_error = true; CHITCHAT_ERROR_START(); - CHITCHAT_ECHOPGM("EEPROM CRC mismatch - (stored) "); - CHITCHAT_ECHO(stored_crc); - CHITCHAT_ECHOPGM(" != "); - CHITCHAT_ECHO(working_crc); - CHITCHAT_ECHOLNPGM(" (calculated)!"); + CHITCHAT_ECHOLNPAIR("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!"); } else if (!validating) { CHITCHAT_ECHO_START(); CHITCHAT_ECHO(version); - CHITCHAT_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET)); - CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc); - CHITCHAT_ECHOLNPGM(")"); + CHITCHAT_ECHOLNPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET), " bytes; crc ", (uint32_t)working_crc, ")"); } if (!validating && !eeprom_error) postprocess(); @@ -1857,8 +1846,7 @@ void MarlinSettings::postprocess() { if (ubl.storage_slot >= 0) { load_mesh(ubl.storage_slot); - CHITCHAT_ECHOPAIR("Mesh ", ubl.storage_slot); - CHITCHAT_ECHOLNPGM(" loaded from storage."); + CHITCHAT_ECHOLNPAIR("Mesh ", ubl.storage_slot, " loaded from storage."); } else { ubl.reset(); @@ -1924,9 +1912,7 @@ void MarlinSettings::postprocess() { const int16_t a = calc_num_meshes(); if (!WITHIN(slot, 0, a - 1)) { ubl_invalid_slot(a); - CHITCHAT_ECHOPAIR("E2END=", persistentStore.capacity() - 1); - CHITCHAT_ECHOPAIR(" meshes_end=", meshes_end); - CHITCHAT_ECHOLNPAIR(" slot=", slot); + CHITCHAT_ECHOLNPAIR("E2END=", persistentStore.capacity() - 1, " meshes_end=", meshes_end, " slot=", slot); CHITCHAT_EOL(); return; } @@ -2314,7 +2300,7 @@ void MarlinSettings::reset() { #define CONFIG_ECHO_HEADING(STR) do{ if (!forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); } }while(0) #if HAS_TRINAMIC - void say_M906() { SERIAL_ECHOPGM(" M906"); } + inline void say_M906(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M906"); } #if HAS_STEALTHCHOP void say_M569(const char * const etc=NULL) { SERIAL_ECHOPGM(" M569 S1"); @@ -2326,15 +2312,15 @@ void MarlinSettings::reset() { } #endif #if ENABLED(HYBRID_THRESHOLD) - void say_M913() { SERIAL_ECHOPGM(" M913"); } + inline void say_M913() { SERIAL_ECHOPGM(" M913"); } #endif #if USE_SENSORLESS - void say_M914() { SERIAL_ECHOPGM(" M914"); } + inline void say_M914() { SERIAL_ECHOPGM(" M914"); } #endif #endif #if ENABLED(ADVANCED_PAUSE_FEATURE) - void say_M603() { SERIAL_ECHOPGM(" M603 "); } + inline void say_M603(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M603 "); } #endif inline void say_units(const bool colon) { @@ -2403,28 +2389,22 @@ void MarlinSettings::reset() { } CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0])); #if EXTRUDERS > 1 CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1])); #if EXTRUDERS > 2 CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2])); #if EXTRUDERS > 3 CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3])); #if EXTRUDERS > 4 CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4])); #if EXTRUDERS > 5 CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5])); #endif // EXTRUDERS > 5 #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 @@ -2441,43 +2421,50 @@ void MarlinSettings::reset() { CONFIG_ECHO_HEADING("Maximum feedrates (units/s):"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS])); - #if DISABLED(DISTINCT_E_FACTORS) - SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])); - #endif - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]) + , " Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]) + , " Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS]) + #if DISABLED(DISTINCT_E_FACTORS) + , " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS]) + #endif + ); #if ENABLED(DISTINCT_E_FACTORS) CONFIG_ECHO_START(); for (uint8_t i = 0; i < E_STEPPERS; i++) { - SERIAL_ECHOPAIR(" M203 T", (int)i); - SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])); + SERIAL_ECHOLNPAIR( + " M203 T", (int)i + , " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)]) + ); } #endif CONFIG_ECHO_HEADING("Maximum Acceleration (units/s2):"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS])); - #if DISABLED(DISTINCT_E_FACTORS) - SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])); - #endif - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]) + , " Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]) + , " Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS]) + #if DISABLED(DISTINCT_E_FACTORS) + , " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS]) + #endif + ); #if ENABLED(DISTINCT_E_FACTORS) CONFIG_ECHO_START(); - for (uint8_t i = 0; i < E_STEPPERS; i++) { - SERIAL_ECHOPAIR(" M201 T", (int)i); - SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])); - } + for (uint8_t i = 0; i < E_STEPPERS; i++) + SERIAL_ECHOLNPAIR( + " M201 T", (int)i + , " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)]) + ); #endif CONFIG_ECHO_HEADING("Acceleration (units/s2): P R T"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M204 P", LINEAR_UNIT(planner.settings.acceleration)); - SERIAL_ECHOPAIR(" R", LINEAR_UNIT(planner.settings.retract_acceleration)); - SERIAL_ECHOLNPAIR(" T", LINEAR_UNIT(planner.settings.travel_acceleration)); + SERIAL_ECHOLNPAIR( + " M204 P", LINEAR_UNIT(planner.settings.acceleration) + , " R", LINEAR_UNIT(planner.settings.retract_acceleration) + , " T", LINEAR_UNIT(planner.settings.travel_acceleration) + ); if (!forReplay) { CONFIG_ECHO_START(); @@ -2494,39 +2481,42 @@ void MarlinSettings::reset() { SERIAL_EOL(); } CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us)); - SERIAL_ECHOPAIR(" S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s)); - SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)); - - #if ENABLED(JUNCTION_DEVIATION) - SERIAL_ECHOPAIR(" J", LINEAR_UNIT(planner.junction_deviation_mm)); - #endif - #if HAS_CLASSIC_JERK - SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS])); - #if DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE) - SERIAL_ECHOPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS])); + SERIAL_ECHOLNPAIR( + " M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us) + , " S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s) + , " T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s) + #if ENABLED(JUNCTION_DEVIATION) + , " J", LINEAR_UNIT(planner.junction_deviation_mm) #endif - #endif - - SERIAL_EOL(); + #if HAS_CLASSIC_JERK + , " X", LINEAR_UNIT(planner.max_jerk[X_AXIS]) + , " Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS]) + , " Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS]) + #if DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE) + , " E", LINEAR_UNIT(planner.max_jerk[E_AXIS]) + #endif + #endif + ); #if HAS_M206_COMMAND CONFIG_ECHO_HEADING("Home offset:"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M206 X", LINEAR_UNIT(home_offset[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(home_offset[Y_AXIS])); - SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(home_offset[Z_AXIS])); + SERIAL_ECHOLNPAIR( + " M206 X", LINEAR_UNIT(home_offset[X_AXIS]) + , " Y", LINEAR_UNIT(home_offset[Y_AXIS]) + , " Z", LINEAR_UNIT(home_offset[Z_AXIS]) + ); #endif #if HAS_HOTEND_OFFSET CONFIG_ECHO_HEADING("Hotend offsets:"); CONFIG_ECHO_START(); for (uint8_t e = 1; e < HOTENDS; e++) { - SERIAL_ECHOPAIR(" M218 T", (int)e); - SERIAL_ECHOPAIR(" X", LINEAR_UNIT(hotend_offset[X_AXIS][e])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e])); + SERIAL_ECHOPAIR( + " M218 T", (int)e + , " X", LINEAR_UNIT(hotend_offset[X_AXIS][e]) + , " Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e]) + ); SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e]), 3); } #endif @@ -2555,11 +2545,12 @@ void MarlinSettings::reset() { #endif CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0); - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height)); - #endif - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M420 S", planner.leveling_active ? 1 : 0 + #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) + , " Z", LINEAR_UNIT(planner.z_fade_height) + #endif + ); #if ENABLED(MESH_BED_LEVELING) @@ -2567,8 +2558,7 @@ void MarlinSettings::reset() { for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) { for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) { CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1); - SERIAL_ECHOPAIR(" Y", (int)py + 1); + SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1, " Y", (int)py + 1); SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(mbl.z_values[px][py]), 5); } } @@ -2580,8 +2570,7 @@ void MarlinSettings::reset() { SERIAL_EOL(); ubl.report_state(); SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot); - SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes()); - SERIAL_ECHOLNPGM(" meshes.\n"); + SERIAL_ECHOLNPAIR("EEPROM can hold ", calc_num_meshes(), " meshes.\n"); } //ubl.report_current_mesh(); // This is too verbose for large meshes. A better (more terse) @@ -2592,8 +2581,7 @@ void MarlinSettings::reset() { for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) { for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) { CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" G29 W I", (int)px); - SERIAL_ECHOPAIR(" J", (int)py); + SERIAL_ECHOPAIR(" G29 W I", (int)px, " J", (int)py); SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(z_values[px][py]), 5); } } @@ -2619,10 +2607,7 @@ void MarlinSettings::reset() { case Z_PROBE_SERVO_NR: #endif CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M281 P", int(i)); - SERIAL_ECHOPAIR(" L", servo_angles[i][0]); - SERIAL_ECHOPAIR(" U", servo_angles[i][1]); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(" M281 P", int(i), " L", servo_angles[i][0], " U", servo_angles[i][1]); default: break; } } @@ -2633,33 +2618,37 @@ void MarlinSettings::reset() { CONFIG_ECHO_HEADING("SCARA settings: S P T"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M665 S", delta_segments_per_second); - SERIAL_ECHOPAIR(" P", scara_home_offset[A_AXIS]); - SERIAL_ECHOPAIR(" T", scara_home_offset[B_AXIS]); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(scara_home_offset[Z_AXIS])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M665 S", delta_segments_per_second + , " P", scara_home_offset[A_AXIS] + , " T", scara_home_offset[B_AXIS] + , " Z", LINEAR_UNIT(scara_home_offset[Z_AXIS]) + ); #elif ENABLED(DELTA) CONFIG_ECHO_HEADING("Endstop adjustment:"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS])); - SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS])); + SERIAL_ECHOLNPAIR( + " M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS]) + , " Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS]) + , " Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS]) + ); CONFIG_ECHO_HEADING("Delta settings: L R H S B XYZ"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M665 L", LINEAR_UNIT(delta_diagonal_rod)); - SERIAL_ECHOPAIR(" R", LINEAR_UNIT(delta_radius)); - SERIAL_ECHOPAIR(" H", LINEAR_UNIT(delta_height)); - SERIAL_ECHOPAIR(" S", delta_segments_per_second); - SERIAL_ECHOPAIR(" B", LINEAR_UNIT(delta_calibration_radius)); - SERIAL_ECHOPAIR(" X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M665 L", LINEAR_UNIT(delta_diagonal_rod) + , " R", LINEAR_UNIT(delta_radius) + , " H", LINEAR_UNIT(delta_height) + , " S", delta_segments_per_second + , " B", LINEAR_UNIT(delta_calibration_radius) + , " X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS]) + , " Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS]) + , " Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS]) + ); - #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS CONFIG_ECHO_HEADING("Endstop adjustment:"); CONFIG_ECHO_START(); @@ -2686,10 +2675,12 @@ void MarlinSettings::reset() { CONFIG_ECHO_HEADING("Material heatup parameters:"); for (uint8_t i = 0; i < COUNT(ui.preheat_hotend_temp); i++) { CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M145 S", (int)i); - SERIAL_ECHOPAIR(" H", TEMP_UNIT(ui.preheat_hotend_temp[i])); - SERIAL_ECHOPAIR(" B", TEMP_UNIT(ui.preheat_bed_temp[i])); - SERIAL_ECHOLNPAIR(" F", int(ui.preheat_fan_speed[i])); + SERIAL_ECHOLNPAIR( + " M145 S", (int)i + , " H", TEMP_UNIT(ui.preheat_hotend_temp[i]) + , " B", TEMP_UNIT(ui.preheat_bed_temp[i]) + , " F", int(ui.preheat_fan_speed[i]) + ); } #endif @@ -2702,10 +2693,12 @@ void MarlinSettings::reset() { if (forReplay) { HOTEND_LOOP() { CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M301 E", e); - SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, e)); - SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, e))); - SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, e))); + SERIAL_ECHOPAIR( + " M301 E", e + , " P", PID_PARAM(Kp, e) + , " I", unscalePID_i(PID_PARAM(Ki, e)) + , " D", unscalePID_d(PID_PARAM(Kd, e)) + ); #if ENABLED(PID_EXTRUSION_SCALING) SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e)); if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len); @@ -2718,23 +2711,25 @@ void MarlinSettings::reset() { // !forReplay || HOTENDS == 1 { CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0 - SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0))); - SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0))); - #if ENABLED(PID_EXTRUSION_SCALING) - SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0)); - SERIAL_ECHOPAIR(" L", thermalManager.lpq_len); - #endif - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M301 P", PID_PARAM(Kp, 0) // for compatibility with hosts, only echo values for E0 + , " I", unscalePID_i(PID_PARAM(Ki, 0)) + , " D", unscalePID_d(PID_PARAM(Kd, 0)) + #if ENABLED(PID_EXTRUSION_SCALING) + , " C", PID_PARAM(Kc, 0) + , " L", thermalManager.lpq_len + #endif + ); } #endif // PIDTEMP #if ENABLED(PIDTEMPBED) CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M304 P", thermalManager.bed_pid.Kp); - SERIAL_ECHOPAIR(" I", unscalePID_i(thermalManager.bed_pid.Ki)); - SERIAL_ECHOPAIR(" D", unscalePID_d(thermalManager.bed_pid.Kd)); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M304 P", thermalManager.bed_pid.Kp + , " I", unscalePID_i(thermalManager.bed_pid.Ki) + , " D", unscalePID_d(thermalManager.bed_pid.Kd) + ); #endif #endif // PIDTEMP || PIDTEMPBED @@ -2755,16 +2750,20 @@ void MarlinSettings::reset() { CONFIG_ECHO_HEADING("Retract: S F Z"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(fwretract.settings.retract_length)); - SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_length)); - SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s))); - SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(fwretract.settings.retract_zraise)); + SERIAL_ECHOLNPAIR( + " M207 S", LINEAR_UNIT(fwretract.settings.retract_length) + , " W", LINEAR_UNIT(fwretract.settings.swap_retract_length) + , " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s)) + , " Z", LINEAR_UNIT(fwretract.settings.retract_zraise) + ); CONFIG_ECHO_HEADING("Recover: S F"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length)); - SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length)); - SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s))); + SERIAL_ECHOLNPAIR( + " M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length) + , " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length) + , " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s)) + ); #if ENABLED(FWRETRACT_AUTORETRACT) @@ -2810,67 +2809,65 @@ void MarlinSettings::reset() { * TMC stepper driver current */ CONFIG_ECHO_HEADING("Stepper driver current:"); - CONFIG_ECHO_START(); + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) - say_M906(); - #endif - #if AXIS_IS_TMC(X) - SERIAL_ECHOPAIR(" X", stepperX.getMilliamps()); - #endif - #if AXIS_IS_TMC(Y) - SERIAL_ECHOPAIR(" Y", stepperY.getMilliamps()); - #endif - #if AXIS_IS_TMC(Z) - SERIAL_ECHOPAIR(" Z", stepperZ.getMilliamps()); - #endif - #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) - SERIAL_EOL(); + say_M906(forReplay); + SERIAL_ECHOLNPAIR( + #if AXIS_IS_TMC(X) + " X", stepperX.getMilliamps(), + #endif + #if AXIS_IS_TMC(Y) + " Y", stepperY.getMilliamps(), + #endif + #if AXIS_IS_TMC(Z) + " Z", stepperZ.getMilliamps() + #endif + ); #endif #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) - say_M906(); + say_M906(forReplay); SERIAL_ECHOPGM(" I1"); - #endif - #if AXIS_IS_TMC(X2) - SERIAL_ECHOPAIR(" X", stepperX2.getMilliamps()); - #endif - #if AXIS_IS_TMC(Y2) - SERIAL_ECHOPAIR(" Y", stepperY2.getMilliamps()); - #endif - #if AXIS_IS_TMC(Z2) - SERIAL_ECHOPAIR(" Z", stepperZ2.getMilliamps()); - #endif - #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + #if AXIS_IS_TMC(X2) + " X", stepperX2.getMilliamps(), + #endif + #if AXIS_IS_TMC(Y2) + " Y", stepperY2.getMilliamps(), + #endif + #if AXIS_IS_TMC(Z2) + " Z", stepperZ2.getMilliamps() + #endif + ); #endif #if AXIS_IS_TMC(Z3) - say_M906(); + say_M906(forReplay); SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps()); #endif #if AXIS_IS_TMC(E0) - say_M906(); + say_M906(forReplay); SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps()); #endif #if AXIS_IS_TMC(E1) - say_M906(); + say_M906(forReplay); SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps()); #endif #if AXIS_IS_TMC(E2) - say_M906(); + say_M906(forReplay); SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps()); #endif #if AXIS_IS_TMC(E3) - say_M906(); + say_M906(forReplay); SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps()); #endif #if AXIS_IS_TMC(E4) - say_M906(); + say_M906(forReplay); SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps()); #endif #if AXIS_IS_TMC(E5) - say_M906(); + say_M906(forReplay); SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps()); #endif SERIAL_EOL(); @@ -2916,8 +2913,7 @@ void MarlinSettings::reset() { #if AXIS_HAS_STEALTHCHOP(Z3) say_M913(); - SERIAL_ECHOPGM(" I2"); - SERIAL_ECHOLNPAIR(" Z", TMC_GET_PWMTHRS(Z, Z3)); + SERIAL_ECHOLNPAIR(" I2 Z", TMC_GET_PWMTHRS(Z, Z3)); #endif #if AXIS_HAS_STEALTHCHOP(E0) @@ -2988,8 +2984,7 @@ void MarlinSettings::reset() { #if HAS_Z3_SENSORLESS say_M914(); - SERIAL_ECHOPGM(" I2"); - SERIAL_ECHOLNPAIR(" Z", stepperZ3.sgt()); + SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.sgt()); #endif #endif // USE_SENSORLESS @@ -3080,20 +3075,19 @@ void MarlinSettings::reset() { #if EXTRUDERS < 2 SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]); #else - LOOP_L_N(i, EXTRUDERS) { - SERIAL_ECHOPAIR(" M900 T", int(i)); - SERIAL_ECHOLNPAIR(" K", planner.extruder_advance_K[i]); - } + LOOP_L_N(i, EXTRUDERS) + SERIAL_ECHOLNPAIR(" M900 T", int(i), " K", planner.extruder_advance_K[i]); #endif #endif #if HAS_MOTOR_CURRENT_PWM CONFIG_ECHO_HEADING("Stepper motor currents:"); CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M907 X", stepper.motor_current_setting[0]); - SERIAL_ECHOPAIR(" Z", stepper.motor_current_setting[1]); - SERIAL_ECHOPAIR(" E", stepper.motor_current_setting[2]); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR( + " M907 X", stepper.motor_current_setting[0] + , " Z", stepper.motor_current_setting[1] + , " E", stepper.motor_current_setting[2] + ); #endif /** @@ -3101,39 +3095,21 @@ void MarlinSettings::reset() { */ #if ENABLED(ADVANCED_PAUSE_FEATURE) CONFIG_ECHO_HEADING("Filament load/unload lengths:"); - CONFIG_ECHO_START(); #if EXTRUDERS == 1 - say_M603(); - SERIAL_ECHOPAIR("L", LINEAR_UNIT(fc_settings[0].load_length)); - SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length)); + say_M603(forReplay); + SERIAL_ECHOLNPAIR("L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length)); #else - say_M603(); - SERIAL_ECHOPAIR("T0 L", LINEAR_UNIT(fc_settings[0].load_length)); - SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length)); - CONFIG_ECHO_START(); - say_M603(); - SERIAL_ECHOPAIR("T1 L", LINEAR_UNIT(fc_settings[1].load_length)); - SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[1].unload_length)); + #define _ECHO_603(N) do{ say_M603(forReplay); SERIAL_ECHOLNPAIR("T" STRINGIFY(N) " L", LINEAR_UNIT(fc_settings[N].load_length), " U", LINEAR_UNIT(fc_settings[N].unload_length)); }while(0) + _ECHO_603(0); + _ECHO_603(1); #if EXTRUDERS > 2 - CONFIG_ECHO_START(); - say_M603(); - SERIAL_ECHOPAIR("T2 L", LINEAR_UNIT(fc_settings[2].load_length)); - SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[2].unload_length)); + _ECHO_603(2); #if EXTRUDERS > 3 - CONFIG_ECHO_START(); - say_M603(); - SERIAL_ECHOPAIR("T3 L", LINEAR_UNIT(fc_settings[3].load_length)); - SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[3].unload_length)); + _ECHO_603(3); #if EXTRUDERS > 4 - CONFIG_ECHO_START(); - say_M603(); - SERIAL_ECHOPAIR("T4 L", LINEAR_UNIT(fc_settings[4].load_length)); - SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[4].unload_length)); + _ECHO_603(4); #if EXTRUDERS > 5 - CONFIG_ECHO_START(); - say_M603(); - SERIAL_ECHOPAIR("T5 L", LINEAR_UNIT(fc_settings[5].load_length)); - SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[5].unload_length)); + _ECHO_603(5); #endif // EXTRUDERS > 5 #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 diff --git a/Marlin/src/module/printcounter.cpp b/Marlin/src/module/printcounter.cpp index 0dc6aead3..4fa3e501f 100644 --- a/Marlin/src/module/printcounter.cpp +++ b/Marlin/src/module/printcounter.cpp @@ -185,51 +185,32 @@ void PrintCounter::showStats() { char buffer[21]; SERIAL_ECHOPGM(MSG_STATS); + SERIAL_ECHOLNPAIR( + "Prints: ", data.totalPrints, + ", Finished: ", data.finishedPrints, + ", Failed: ", data.totalPrints - data.finishedPrints + - ((isRunning() || isPaused()) ? 1 : 0) // Remove 1 from failures with an active counter + ); - SERIAL_ECHOPGM("Prints: "); - SERIAL_ECHO(data.totalPrints); - - SERIAL_ECHOPGM(", Finished: "); - SERIAL_ECHO(data.finishedPrints); - - SERIAL_ECHOPGM(", Failed: "); // Note: Removes 1 from failures with an active counter - SERIAL_ECHO(data.totalPrints - data.finishedPrints - - ((isRunning() || isPaused()) ? 1 : 0)); - - SERIAL_EOL(); SERIAL_ECHOPGM(MSG_STATS); - duration_t elapsed = data.printTime; elapsed.toString(buffer); - - SERIAL_ECHOPGM("Total time: "); - SERIAL_ECHO(buffer); - + SERIAL_ECHOPAIR("Total time: ", buffer); #if ENABLED(DEBUG_PRINTCOUNTER) - SERIAL_ECHOPGM(" ("); - SERIAL_ECHO(data.printTime); + SERIAL_ECHOPAIR(" (", data.printTime); SERIAL_CHAR(')'); #endif elapsed = data.longestPrint; elapsed.toString(buffer); - - SERIAL_ECHOPGM(", Longest job: "); - SERIAL_ECHO(buffer); - + SERIAL_ECHOPAIR(", Longest job: ", buffer); #if ENABLED(DEBUG_PRINTCOUNTER) - SERIAL_ECHOPGM(" ("); - SERIAL_ECHO(data.longestPrint); + SERIAL_ECHOPAIR(" (", data.longestPrint); SERIAL_CHAR(')'); #endif - SERIAL_EOL(); - SERIAL_ECHOPGM(MSG_STATS); - - SERIAL_ECHOPGM("Filament used: "); - SERIAL_ECHO(data.filamentUsed / 1000); + SERIAL_ECHOPAIR("\n" MSG_STATS "Filament used: ", data.filamentUsed / 1000); SERIAL_CHAR('m'); - SERIAL_EOL(); #if SERVICE_INTERVAL_1 > 0 diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index ee6bff24c..87e5e795f 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -83,11 +83,7 @@ float zprobe_zoffset; // Initialized by settings.load() */ static void dock_sled(bool stow) { #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR("dock_sled(", stow); - SERIAL_CHAR(')'); - SERIAL_EOL(); - } + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("dock_sled(", stow, ")"); #endif // Dock sled a bit closer to ensure proper capturing @@ -317,11 +313,7 @@ float zprobe_zoffset; // Initialized by settings.load() bltouch_command(deploy ? BLTOUCH_DEPLOY : BLTOUCH_STOW); #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR("set_bltouch_deployed(", deploy); - SERIAL_CHAR(')'); - SERIAL_EOL(); - } + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("set_bltouch_deployed(", deploy, ")"); #endif return false; @@ -334,11 +326,7 @@ float zprobe_zoffset; // Initialized by settings.load() */ inline void do_probe_raise(const float z_raise) { #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR("do_probe_raise(", z_raise); - SERIAL_CHAR(')'); - SERIAL_EOL(); - } + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("do_probe_raise(", z_raise, ")"); #endif float z_dest = z_raise; @@ -707,10 +695,7 @@ static float run_z_probe() { const float z2 = current_position[Z_AXIS]; #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR("2nd Probe Z:", z2); - SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - z2); - } + if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("2nd Probe Z:", z2, " Discrepancy:", first_probe_z - z2); #endif // Return a weighted average of the fast and slow probes @@ -742,12 +727,14 @@ static float run_z_probe() { float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR(">>> probe_pt(", LOGICAL_X_POSITION(rx)); - SERIAL_ECHOPAIR(", ", LOGICAL_Y_POSITION(ry)); - SERIAL_ECHOPAIR(", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none"); - SERIAL_ECHOPAIR(", ", int(verbose_level)); - SERIAL_ECHOPAIR(", ", probe_relative ? "probe" : "nozzle"); - SERIAL_ECHOLNPGM("_relative)"); + SERIAL_ECHOLNPAIR( + ">>> probe_pt(", LOGICAL_X_POSITION(rx), + ", ", LOGICAL_Y_POSITION(ry), + ", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none", + ", ", int(verbose_level), + ", ", probe_relative ? "probe" : "nozzle", + "_relative)" + ); DEBUG_POS("", current_position); } #endif diff --git a/Marlin/src/module/scara.cpp b/Marlin/src/module/scara.cpp index 75c6f97eb..19b9c7343 100644 --- a/Marlin/src/module/scara.cpp +++ b/Marlin/src/module/scara.cpp @@ -45,8 +45,7 @@ void scara_set_axis_is_at_home(const AxisEnum axis) { float homeposition[XYZ]; LOOP_XYZ(i) homeposition[i] = base_home_pos((AxisEnum)i); - // SERIAL_ECHOPAIR("homeposition X:", homeposition[X_AXIS]); - // SERIAL_ECHOLNPAIR(" Y:", homeposition[Y_AXIS]); + // SERIAL_ECHOLNPAIR("homeposition X:", homeposition[X_AXIS], " Y:", homeposition[Y_AXIS]); /** * Get Home position SCARA arm angles using inverse kinematics, @@ -55,8 +54,7 @@ void scara_set_axis_is_at_home(const AxisEnum axis) { inverse_kinematics(homeposition); forward_kinematics_SCARA(delta[A_AXIS], delta[B_AXIS]); - // SERIAL_ECHOPAIR("Cartesian X:", cartes[X_AXIS]); - // SERIAL_ECHOLNPAIR(" Y:", cartes[Y_AXIS]); + // SERIAL_ECHOLNPAIR("Cartesian X:", cartes[X_AXIS], " Y:", cartes[Y_AXIS]); current_position[axis] = cartes[axis]; @@ -80,14 +78,15 @@ void forward_kinematics_SCARA(const float &a, const float &b) { cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi /* - SERIAL_ECHOPAIR("SCARA FK Angle a=", a); - SERIAL_ECHOPAIR(" b=", b); - SERIAL_ECHOPAIR(" a_sin=", a_sin); - SERIAL_ECHOPAIR(" a_cos=", a_cos); - SERIAL_ECHOPAIR(" b_sin=", b_sin); - SERIAL_ECHOLNPAIR(" b_cos=", b_cos); - SERIAL_ECHOPAIR(" cartes[X_AXIS]=", cartes[X_AXIS]); - SERIAL_ECHOLNPAIR(" cartes[Y_AXIS]=", cartes[Y_AXIS]); + SERIAL_ECHOLNPAIR( + "SCARA FK Angle a=", a, + " b=", b, + " a_sin=", a_sin, + " a_cos=", a_cos, + " b_sin=", b_sin, + " b_cos=", b_cos + ); + SERIAL_ECHOLNPAIR(" cartes (X,Y) = "(cartes[X_AXIS], ", ", cartes[Y_AXIS], ")"); //*/ } @@ -132,18 +131,12 @@ void inverse_kinematics(const float (&raw)[XYZ]) { /* DEBUG_POS("SCARA IK", raw); DEBUG_POS("SCARA IK", delta); - SERIAL_ECHOPAIR(" SCARA (x,y) ", sx); - SERIAL_ECHOPAIR(",", sy); - SERIAL_ECHOPAIR(" C2=", C2); - SERIAL_ECHOPAIR(" S2=", S2); - SERIAL_ECHOPAIR(" Theta=", THETA); - SERIAL_ECHOLNPAIR(" Phi=", PHI); + SERIAL_ECHOLNPAIR(" SCARA (x,y) ", sx, ",", sy, " C2=", C2, " S2=", S2, " Theta=", THETA, " Phi=", PHI); //*/ } void scara_report_positions() { - SERIAL_ECHOPAIR("SCARA Theta:", planner.get_axis_position_degrees(A_AXIS)); - SERIAL_ECHOLNPAIR(" Psi+Theta:", planner.get_axis_position_degrees(B_AXIS)); + SERIAL_ECHOLNPAIR("SCARA Theta:", planner.get_axis_position_degrees(A_AXIS), " Psi+Theta:", planner.get_axis_position_degrees(B_AXIS)); SERIAL_EOL(); } diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index a333f0220..d697939ff 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -456,37 +456,26 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; bias = constrain(bias, 20, max_pow - 20); d = (bias > max_pow >> 1) ? max_pow - 1 - bias : bias; - SERIAL_ECHOPAIR(MSG_BIAS, bias); - SERIAL_ECHOPAIR(MSG_D, d); - SERIAL_ECHOPAIR(MSG_T_MIN, min); - SERIAL_ECHOPAIR(MSG_T_MAX, max); + SERIAL_ECHOPAIR(MSG_BIAS, bias, MSG_D, d, MSG_T_MIN, min, MSG_T_MAX, max); if (cycles > 2) { float Ku = (4.0f * d) / (float(M_PI) * (max - min) * 0.5f), Tu = ((float)(t_low + t_high) * 0.001f); - SERIAL_ECHOPAIR(MSG_KU, Ku); - SERIAL_ECHOPAIR(MSG_TU, Tu); tune_pid.Kp = 0.6f * Ku; tune_pid.Ki = 2 * tune_pid.Kp / Tu; tune_pid.Kd = tune_pid.Kp * Tu * 0.125f; + SERIAL_ECHOPAIR(MSG_KU, Ku, MSG_TU, Tu); SERIAL_ECHOLNPGM("\n" MSG_CLASSIC_PID); - SERIAL_ECHOPAIR(MSG_KP, tune_pid.Kp); - SERIAL_ECHOPAIR(MSG_KI, tune_pid.Ki); - SERIAL_ECHOLNPAIR(MSG_KD, tune_pid.Kd); + SERIAL_ECHOLNPAIR(MSG_KP, tune_pid.Kp, MSG_KI, tune_pid.Ki, MSG_KD, tune_pid.Kd); /** tune_pid.Kp = 0.33*Ku; tune_pid.Ki = tune_pid.Kp/Tu; tune_pid.Kd = tune_pid.Kp*Tu/3; SERIAL_ECHOLNPGM(" Some overshoot"); - SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp); - SERIAL_ECHOPAIR(" Ki: ", tune_pid.Ki); - SERIAL_ECHOPAIR(" Kd: ", tune_pid.Kd); + SERIAL_ECHOLNPAIR(" Kp: ", tune_pid.Kp, " Ki: ", tune_pid.Ki, " Kd: ", tune_pid.Kd, " No overshoot"); tune_pid.Kp = 0.2*Ku; tune_pid.Ki = 2*tune_pid.Kp/Tu; tune_pid.Kd = tune_pid.Kp*Tu/3; - SERIAL_ECHOLNPGM(" No overshoot"); - SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp); - SERIAL_ECHOPAIR(" Ki: ", tune_pid.Ki); - SERIAL_ECHOPAIR(" Kd: ", tune_pid.Kd); + SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp, " Ki: ", tune_pid.Ki, " Kd: ", tune_pid.Kd); */ } } @@ -807,16 +796,20 @@ float Temperature::get_pid_output(const int8_t e) { #if ENABLED(PID_DEBUG) SERIAL_ECHO_START(); - SERIAL_ECHOPAIR(MSG_PID_DEBUG, HOTEND_INDEX); - SERIAL_ECHOPAIR(MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX]); - SERIAL_ECHOPAIR(MSG_PID_DEBUG_OUTPUT, pid_output); + SERIAL_ECHOPAIR( + MSG_PID_DEBUG, HOTEND_INDEX, + MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX], + MSG_PID_DEBUG_OUTPUT, pid_output + ); #if DISABLED(PID_OPENLOOP) - SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, work_pid[HOTEND_INDEX].Kp); - SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, work_pid[HOTEND_INDEX].Ki); - SERIAL_ECHOPAIR(MSG_PID_DEBUG_DTERM, work_pid[HOTEND_INDEX].Kd); - #if ENABLED(PID_EXTRUSION_SCALING) - SERIAL_ECHOPAIR(MSG_PID_DEBUG_CTERM, work_pid[HOTEND_INDEX].Kc); - #endif + SERIAL_ECHOPAIR( + MSG_PID_DEBUG_PTERM, work_pid[HOTEND_INDEX].Kp, + MSG_PID_DEBUG_ITERM, work_pid[HOTEND_INDEX].Ki, + MSG_PID_DEBUG_DTERM, work_pid[HOTEND_INDEX].Kd + #if ENABLED(PID_EXTRUSION_SCALING), + MSG_PID_DEBUG_CTERM, work_pid[HOTEND_INDEX].Kc + #endif + ); #endif SERIAL_EOL(); #endif // PID_DEBUG @@ -869,13 +862,14 @@ float Temperature::get_pid_output(const int8_t e) { #if ENABLED(PID_BED_DEBUG) SERIAL_ECHO_START(); - SERIAL_ECHOPAIR(" PID_BED_DEBUG : Input ", current_temperature_bed); - SERIAL_ECHOPAIR(" Output ", pid_output); - #if DISABLED(PID_OPENLOOP) - SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, work_pid.Kp); - SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, work_pid.Ki); - SERIAL_ECHOLNPAIR(MSG_PID_DEBUG_DTERM, work_pid.Kd); - #endif + SERIAL_ECHOLNPAIR( + " PID_BED_DEBUG : Input ", current_temperature_bed, " Output ", pid_output, + #if DISABLED(PID_OPENLOOP) + MSG_PID_DEBUG_PTERM, work_pid.Kp, + MSG_PID_DEBUG_ITERM, work_pid.Ki, + MSG_PID_DEBUG_DTERM, work_pid.Kd, + #endif + ); #endif return pid_output; @@ -1622,10 +1616,7 @@ void Temperature::init() { SERIAL_ECHO_START(); SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: "); if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHO(heater_id); - SERIAL_ECHOPAIR(" ; State:", *state); - SERIAL_ECHOPAIR(" ; Timer:", *timer); - SERIAL_ECHOPAIR(" ; Temperature:", current); - SERIAL_ECHOPAIR(" ; Target Temp:", target); + SERIAL_ECHOPAIR(" ; State:", *state, " ; Timer:", *timer, " ; Temperature:", current, " ; Target Temp:", target); if (heater_id >= 0) SERIAL_ECHOPAIR(" ; Idle Timeout:", heater_idle_timeout_exceeded[heater_id]); else diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp index 289166ef9..c16048643 100644 --- a/Marlin/src/module/tool_change.cpp +++ b/Marlin/src/module/tool_change.cpp @@ -804,12 +804,8 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n #endif #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) { - SERIAL_ECHOPAIR("Offset Tool XY by { ", xdiff); - SERIAL_ECHOPAIR(", ", ydiff); - SERIAL_ECHOPAIR(", ", zdiff); - SERIAL_ECHOLNPGM(" }"); - } + if (DEBUGGING(LEVELING)) + SERIAL_ECHOLNPAIR("Offset Tool XY by { ", xdiff, ", ", ydiff, ", ", zdiff, " }"); #endif // The newly-selected extruder XY is actually at... diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp index d76bbe8c9..fe05beedb 100644 --- a/Marlin/src/sd/cardreader.cpp +++ b/Marlin/src/sd/cardreader.cpp @@ -438,9 +438,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall filespos[file_subcall_ctr] = sdpos; SERIAL_ECHO_START(); - SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", path); - SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]); - SERIAL_ECHOLNPAIR("\" pos", sdpos); + SERIAL_ECHOLNPAIR("SUBROUTINE CALL target:\"", path, "\" parent:\"", proc_filenames[file_subcall_ctr], "\" pos", sdpos); file_subcall_ctr++; } else @@ -470,8 +468,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall if (file.open(curDir, fname, O_READ)) { filesize = file.fileSize(); sdpos = 0; - SERIAL_ECHOPAIR(MSG_SD_FILE_OPENED, fname); - SERIAL_ECHOLNPAIR(MSG_SD_SIZE, filesize); + SERIAL_ECHOLNPAIR(MSG_SD_FILE_OPENED, fname, MSG_SD_SIZE, filesize); SERIAL_ECHOLNPGM(MSG_SD_FILE_SELECTED); getfilename(0, fname); @@ -480,18 +477,12 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall // SERIAL_ECHOPAIR(MSG_SD_FILE_LONG_NAME, longFilename); //} } - else { - SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, fname); - SERIAL_CHAR('.'); - SERIAL_EOL(); - } + else + SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, fname, "."); } else { //write - if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) { - SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, fname); - SERIAL_CHAR('.'); - SERIAL_EOL(); - } + if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) + SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, fname, "."); else { flag.saving = true; getfilename(0, fname); @@ -520,10 +511,8 @@ void CardReader::removeFile(const char * const name) { presort(); #endif } - else { - SERIAL_ECHOPAIR("Deletion failed, File: ", fname); - SERIAL_CHAR('.'); - } + else + SERIAL_ECHOLNPAIR("Deletion failed, File: ", fname, "."); } void CardReader::report_status() { @@ -669,9 +658,7 @@ const char* CardReader::diveToFile(SdFile*& curDir, const char * const path, con if (echo) SERIAL_ECHOLN(dosSubdirname); if (!myDir.open(curDir, dosSubdirname, O_READ)) { - SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname); - SERIAL_CHAR('.'); - SERIAL_EOL(); + SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname, "."); return NULL; } curDir = &myDir; @@ -1030,11 +1017,8 @@ void CardReader::printingHasFinished() { void CardReader::openJobRecoveryFile(const bool read) { if (!isDetected()) return; if (recovery.file.isOpen()) return; - if (!recovery.file.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) { - SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name); - SERIAL_CHAR('.'); - SERIAL_EOL(); - } + if (!recovery.file.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) + SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name, "."); else if (!read) SERIAL_ECHOLNPAIR(MSG_SD_WRITE_TO_FILE, job_recovery_file_name); }