cloned from https://github.com/Phunkafizer/RaspyRFM

Find a file

Stefan Seyfried 99b37cbb29 rfm69: print all messages to stderr (#7 ) This allows code using this module to print its output to stdout without interference. Possible future improvement: add an option to specify if any non-fatal message should be printed.		2020-12-23 00:30:25 +01:00
apps	Add REV Ritter shutter	2020-12-09 23:59:47 +01:00
overlay	add devicetree overlay	2020-02-05 20:30:26 +01:00
raspyrfm	rfm69: print all messages to stderr (#7 )	2020-12-23 00:30:25 +01:00
.gitignore	clean up & project reorganisation	2020-01-22 22:09:15 +01:00
culemu.py	clean up & project reorganisation	2020-01-22 22:09:15 +01:00
LICENCE.txt	Create LICENCE.txt	2017-02-03 11:12:48 +01:00
README.md	add pilota casa protokoll	2020-12-05 23:46:47 +01:00
setup.py	refactoring	2020-01-23 21:23:04 +01:00
spitest.py	add api test	2018-04-26 22:44:49 +00:00

README.md

Python module & examples for RaspyRFM

#Installation

sudo su
apt-get install git-core python-dev
apt-get install python-pip

cd <downloaded RaspyRFM code> #folder in which setup.py is located
pip install -e .

#Using python module and set parameters

import RasyRFM
rfm = RaspyRFM(1, RFM69)
rfm.set_params(
        Freq = 868.300, #MHz center frequency
        ModulationType = rfm69.FSK, #modulation
        Datarate = 9.992, #kbit/s baudrate
        Deviation = 19.042, #kHz frequency deviation
        SyncPattern = [0xc6, 0x26, 0xc6, 0x26], #syncword
        Bandwidth = 100, #kHz bandwidth
        RssiThresh = -105, #dBm RSSI threshold
		TXPower = 13, #dBm
		Preamble = 2, #bytes
)

connair.py

emulate a gateway for controlling RC sockets via the app power-switch. Compatible to "Brennenstuhl Brematic", Intertechno "ITGW-433", "ConnAir" see https://power-switch.eu/

emoncms.py

receive lacrosse-sensors with the RaspyRFM and post them to the open energy monitor, see https://openenergymonitor.org/

Receive and send 433 MHz RC remote controls

./rcpulse.py
./rcpulse.py -p intertechno -i 47612 -u 1 -a on
./rcpulse.py -p logilight -i 76123 -u 1 -a on
./rcpulse.py -p pilota -i 1234 -g 1 -u 1 -a on

Receive 868 MHz ELV FS20 RC remote controls

./rcpulse -f 868.35

lacrosse.py

receiving lacrosse temperature sensors IT29-T, IT35-T, ...

sudo ./lacrosse.py
RFM69 found on CS 1
INIT COMPLETE
Waiting for sensors...
La crosse {'batlo': False, 'AFC': 94, 'init': False, 'T': (19.6, 'C'), 'RSSI': -105, 'RH': (60, '%'), 'ID': '68'}
La crosse {'batlo': False, 'AFC': -118, 'init': False, 'T': (19.5, 'C'), 'RSSI': -98, 'RH': (60, '%'), 'ID': '78'}
La crosse {'batlo': False, 'AFC': 6, 'init': False, 'T': (20.4, 'C'), 'RSSI': -87, 'RH': (58, '%'), 'ID': 'e4'}
La crosse {'batlo': False, 'AFC': 114, 'init': False, 'T': (19.7, 'C'), 'RSSI': -86, 'RH': (57, '%'), 'ID': '24'}
La crosse {'batlo': False, 'AFC': 52, 'init': False, 'T': (19.5, 'C'), 'RSSI': -58, 'RH': (60, '%'), 'ID': '68'}
La crosse {'batlo': False, 'AFC': 14, 'init': False, 'T': (20.5, 'C'), 'RSSI': -97, 'RH': (56, '%'), 'ID': '4'}
La crosse {'batlo': False, 'AFC': 308, 'init': False, 'T': (19.5, 'C'), 'RSSI': -103, 'RH': (60, '%'), 'ID': '68'}
La crosse {'batlo': False, 'AFC': 376, 'init': False, 'T': (19.7, 'C'), 'RSSI': -103, 'RH': (57, '%'), 'ID': '24'}

Product

Module RaspbyRFM Seegel Systeme