S. Seegel ea2bf6c4ff add encode for emylo

clean up

2020-11-24 11:07:59 +01:00

3.1 KiB

Raw Blame History

Python module & examples for RaspyRFM

#Installation

sudo su
apt-get install git-core python-dev
apt-get install python-pip

cd <downloaded RaspyRFM code> #folder in which setup.py is located
pip install -e .

#Using python module and set parameters

import RasyRFM
rfm = RaspyRFM(1, RFM69)
rfm.set_params(
        Freq = 868.300, #MHz center frequency
        ModulationType = rfm69.FSK, #modulation
        Datarate = 9.992, #kbit/s baudrate
        Deviation = 19.042, #kHz frequency deviation
        SyncPattern = [0xc6, 0x26, 0xc6, 0x26], #syncword
        Bandwidth = 100, #kHz bandwidth
        RssiThresh = -105, #dBm RSSI threshold
		TXPower = 13, #dBm
		Preamble = 2, #bytes
)

connair.py

emulate a gateway for controlling RC sockets via the app power-switch. Compatible to "Brennenstuhl Brematic", Intertechno "ITGW-433", "ConnAir" see https://power-switch.eu/

emoncms.py

receive lacrosse-sensors with the RaspyRFM and post them to the open energy monitor, see https://openenergymonitor.org/

fs20tx.py

controlling FS20 RX sockets

sudo ./fs20tx <housecode> <address> <command>

intertechno.py

controlling remote control sockets

./rcpulse.py -p ittristate -o <HOUSECODE A-P> -g <GROUP 1-4> -u <CHANNEL 1-4> -s <0|1> #control old intertechno sockets
./rcpulse.py -p ittristate -c <12 symbols tristate code> #control old intertechno sockets
rcpulse <26 bit address 0|1> <1 goup bit 0|1> <4 bit unit 0|1> on|off #control intertechno self learning
rcpulse <32 bit code 0|1> #control intertechno and compatible (HAMA, REV)
rcpulse <5 DIP 0|1> <channel 1-4> on|off #control Brennenstuhl RC1000 
usage example:
./rcpulse.py -p ittristate -o A -g 1 -u 1 -s 1
./rcpulse.py -p ittristate -c 0000FFFF0FFF
./rcpulse 11110000111100001111000010 0 1110 on
./rcpulse 11110000111100001111000010010000

Receive 433 MHz RC remote controls

./rcpulse.py

Receive 868 MHz ELV FS20 RC remote controls

./rcpulse -f 868.35

lacrosse.py

receiving lacrosse temperature sensors IT29-T, IT35-T, ...

sudo ./lacrosse.py
RFM69 found on CS 1
INIT COMPLETE
Waiting for sensors...
La crosse {'batlo': False, 'AFC': 94, 'init': False, 'T': (19.6, 'C'), 'RSSI': -105, 'RH': (60, '%'), 'ID': '68'}
La crosse {'batlo': False, 'AFC': -118, 'init': False, 'T': (19.5, 'C'), 'RSSI': -98, 'RH': (60, '%'), 'ID': '78'}
La crosse {'batlo': False, 'AFC': 6, 'init': False, 'T': (20.4, 'C'), 'RSSI': -87, 'RH': (58, '%'), 'ID': 'e4'}
La crosse {'batlo': False, 'AFC': 114, 'init': False, 'T': (19.7, 'C'), 'RSSI': -86, 'RH': (57, '%'), 'ID': '24'}
La crosse {'batlo': False, 'AFC': 52, 'init': False, 'T': (19.5, 'C'), 'RSSI': -58, 'RH': (60, '%'), 'ID': '68'}
La crosse {'batlo': False, 'AFC': 14, 'init': False, 'T': (20.5, 'C'), 'RSSI': -97, 'RH': (56, '%'), 'ID': '4'}
La crosse {'batlo': False, 'AFC': 308, 'init': False, 'T': (19.5, 'C'), 'RSSI': -103, 'RH': (60, '%'), 'ID': '68'}
La crosse {'batlo': False, 'AFC': 376, 'init': False, 'T': (19.7, 'C'), 'RSSI': -103, 'RH': (57, '%'), 'ID': '24'}

Product

Module RaspbyRFM Seegel Systeme

3.1 KiB Raw Blame History